doxygen.config
author insilmaril
Thu, 22 Jan 2009 11:39:53 +0000
changeset 736 21f115d48daf
parent 728 a8a98a94899a
child 758 04039e47ac74
permissions -rw-r--r--
More work on removing Selection class
     1 # Doxyfile 1.5.5
     2 
     3 # This file describes the settings to be used by the documentation system
     4 # doxygen (www.doxygen.org) for a project
     5 #
     6 # All text after a hash (#) is considered a comment and will be ignored
     7 # The format is:
     8 #       TAG = value [value, ...]
     9 # For lists items can also be appended using:
    10 #       TAG += value [value, ...]
    11 # Values that contain spaces should be placed between quotes (" ")
    12 
    13 #---------------------------------------------------------------------------
    14 # Project related configuration options
    15 #---------------------------------------------------------------------------
    16 
    17 # This tag specifies the encoding used for all characters in the config file 
    18 # that follow. The default is UTF-8 which is also the encoding used for all 
    19 # text before the first occurrence of this tag. Doxygen uses libiconv (or the 
    20 # iconv built into libc) for the transcoding. See 
    21 # http://www.gnu.org/software/libiconv for the list of possible encodings.
    22 
    23 DOXYFILE_ENCODING      = UTF-8
    24 
    25 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
    26 # by quotes) that should identify the project.
    27 
    28 PROJECT_NAME           = 
    29 
    30 # The PROJECT_NUMBER tag can be used to enter a project or revision number. 
    31 # This could be handy for archiving the generated documentation or 
    32 # if some version control system is used.
    33 
    34 PROJECT_NUMBER         = 
    35 
    36 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
    37 # base path where the generated documentation will be put. 
    38 # If a relative path is entered, it will be relative to the location 
    39 # where doxygen was started. If left blank the current directory will be used.
    40 
    41 OUTPUT_DIRECTORY       = 
    42 
    43 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
    44 # 4096 sub-directories (in 2 levels) under the output directory of each output 
    45 # format and will distribute the generated files over these directories. 
    46 # Enabling this option can be useful when feeding doxygen a huge amount of 
    47 # source files, where putting all generated files in the same directory would 
    48 # otherwise cause performance problems for the file system.
    49 
    50 CREATE_SUBDIRS         = NO
    51 
    52 # The OUTPUT_LANGUAGE tag is used to specify the language in which all 
    53 # documentation generated by doxygen is written. Doxygen will use this 
    54 # information to generate all constant output in the proper language. 
    55 # The default language is English, other supported languages are: 
    56 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, 
    57 # Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, 
    58 # Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), 
    59 # Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, 
    60 # Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, 
    61 # and Ukrainian.
    62 
    63 OUTPUT_LANGUAGE        = English
    64 
    65 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
    66 # include brief member descriptions after the members that are listed in 
    67 # the file and class documentation (similar to JavaDoc). 
    68 # Set to NO to disable this.
    69 
    70 BRIEF_MEMBER_DESC      = YES
    71 
    72 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
    73 # the brief description of a member or function before the detailed description. 
    74 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
    75 # brief descriptions will be completely suppressed.
    76 
    77 REPEAT_BRIEF           = YES
    78 
    79 # This tag implements a quasi-intelligent brief description abbreviator 
    80 # that is used to form the text in various listings. Each string 
    81 # in this list, if found as the leading text of the brief description, will be 
    82 # stripped from the text and the result after processing the whole list, is 
    83 # used as the annotated text. Otherwise, the brief description is used as-is. 
    84 # If left blank, the following values are used ("$name" is automatically 
    85 # replaced with the name of the entity): "The $name class" "The $name widget" 
    86 # "The $name file" "is" "provides" "specifies" "contains" 
    87 # "represents" "a" "an" "the"
    88 
    89 ABBREVIATE_BRIEF       = 
    90 
    91 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
    92 # Doxygen will generate a detailed section even if there is only a brief 
    93 # description.
    94 
    95 ALWAYS_DETAILED_SEC    = NO
    96 
    97 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 
    98 # inherited members of a class in the documentation of that class as if those 
    99 # members were ordinary class members. Constructors, destructors and assignment 
   100 # operators of the base classes will not be shown.
   101 
   102 INLINE_INHERITED_MEMB  = NO
   103 
   104 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
   105 # path before files name in the file list and in the header files. If set 
   106 # to NO the shortest path that makes the file name unique will be used.
   107 
   108 FULL_PATH_NAMES        = YES
   109 
   110 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
   111 # can be used to strip a user-defined part of the path. Stripping is 
   112 # only done if one of the specified strings matches the left-hand part of 
   113 # the path. The tag can be used to show relative paths in the file list. 
   114 # If left blank the directory from which doxygen is run is used as the 
   115 # path to strip.
   116 
   117 STRIP_FROM_PATH        = 
   118 
   119 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
   120 # the path mentioned in the documentation of a class, which tells 
   121 # the reader which header file to include in order to use a class. 
   122 # If left blank only the name of the header file containing the class 
   123 # definition is used. Otherwise one should specify the include paths that 
   124 # are normally passed to the compiler using the -I flag.
   125 
   126 STRIP_FROM_INC_PATH    = 
   127 
   128 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
   129 # (but less readable) file names. This can be useful is your file systems 
   130 # doesn't support long names like on DOS, Mac, or CD-ROM.
   131 
   132 SHORT_NAMES            = NO
   133 
   134 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
   135 # will interpret the first line (until the first dot) of a JavaDoc-style 
   136 # comment as the brief description. If set to NO, the JavaDoc 
   137 # comments will behave just like regular Qt-style comments 
   138 # (thus requiring an explicit @brief command for a brief description.)
   139 
   140 JAVADOC_AUTOBRIEF      = NO
   141 
   142 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will 
   143 # interpret the first line (until the first dot) of a Qt-style 
   144 # comment as the brief description. If set to NO, the comments 
   145 # will behave just like regular Qt-style comments (thus requiring 
   146 # an explicit \brief command for a brief description.)
   147 
   148 QT_AUTOBRIEF           = NO
   149 
   150 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
   151 # treat a multi-line C++ special comment block (i.e. a block of //! or /// 
   152 # comments) as a brief description. This used to be the default behaviour. 
   153 # The new default is to treat a multi-line C++ comment block as a detailed 
   154 # description. Set this tag to YES if you prefer the old behaviour instead.
   155 
   156 MULTILINE_CPP_IS_BRIEF = NO
   157 
   158 # If the DETAILS_AT_TOP tag is set to YES then Doxygen 
   159 # will output the detailed description near the top, like JavaDoc.
   160 # If set to NO, the detailed description appears after the member 
   161 # documentation.
   162 
   163 DETAILS_AT_TOP         = NO
   164 
   165 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
   166 # member inherits the documentation from any documented member that it 
   167 # re-implements.
   168 
   169 INHERIT_DOCS           = YES
   170 
   171 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 
   172 # a new page for each member. If set to NO, the documentation of a member will 
   173 # be part of the file/class/namespace that contains it.
   174 
   175 SEPARATE_MEMBER_PAGES  = NO
   176 
   177 # The TAB_SIZE tag can be used to set the number of spaces in a tab. 
   178 # Doxygen uses this value to replace tabs by spaces in code fragments.
   179 
   180 TAB_SIZE               = 8
   181 
   182 # This tag can be used to specify a number of aliases that acts 
   183 # as commands in the documentation. An alias has the form "name=value". 
   184 # For example adding "sideeffect=\par Side Effects:\n" will allow you to 
   185 # put the command \sideeffect (or @sideeffect) in the documentation, which 
   186 # will result in a user-defined paragraph with heading "Side Effects:". 
   187 # You can put \n's in the value part of an alias to insert newlines.
   188 
   189 ALIASES                = 
   190 
   191 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
   192 # sources only. Doxygen will then generate output that is more tailored for C. 
   193 # For instance, some of the names that are used will be different. The list 
   194 # of all members will be omitted, etc.
   195 
   196 OPTIMIZE_OUTPUT_FOR_C  = NO
   197 
   198 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java 
   199 # sources only. Doxygen will then generate output that is more tailored for 
   200 # Java. For instance, namespaces will be presented as packages, qualified 
   201 # scopes will look different, etc.
   202 
   203 OPTIMIZE_OUTPUT_JAVA   = NO
   204 
   205 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran 
   206 # sources only. Doxygen will then generate output that is more tailored for 
   207 # Fortran.
   208 
   209 OPTIMIZE_FOR_FORTRAN   = NO
   210 
   211 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL 
   212 # sources. Doxygen will then generate output that is tailored for 
   213 # VHDL.
   214 
   215 OPTIMIZE_OUTPUT_VHDL   = NO
   216 
   217 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want 
   218 # to include (a tag file for) the STL sources as input, then you should 
   219 # set this tag to YES in order to let doxygen match functions declarations and 
   220 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s. 
   221 # func(std::string) {}). This also make the inheritance and collaboration 
   222 # diagrams that involve STL classes more complete and accurate.
   223 
   224 BUILTIN_STL_SUPPORT    = NO
   225 
   226 # If you use Microsoft's C++/CLI language, you should set this option to YES to
   227 # enable parsing support.
   228 
   229 CPP_CLI_SUPPORT        = NO
   230 
   231 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. 
   232 # Doxygen will parse them like normal C++ but will assume all classes use public 
   233 # instead of private inheritance when no explicit protection keyword is present.
   234 
   235 SIP_SUPPORT            = NO
   236 
   237 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
   238 # tag is set to YES, then doxygen will reuse the documentation of the first 
   239 # member in the group (if any) for the other members of the group. By default 
   240 # all members of a group must be documented explicitly.
   241 
   242 DISTRIBUTE_GROUP_DOC   = NO
   243 
   244 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
   245 # the same type (for instance a group of public functions) to be put as a 
   246 # subgroup of that type (e.g. under the Public Functions section). Set it to 
   247 # NO to prevent subgrouping. Alternatively, this can be done per class using 
   248 # the \nosubgrouping command.
   249 
   250 SUBGROUPING            = YES
   251 
   252 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum 
   253 # is documented as struct, union, or enum with the name of the typedef. So 
   254 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct 
   255 # with name TypeT. When disabled the typedef will appear as a member of a file, 
   256 # namespace, or class. And the struct will be named TypeS. This can typically 
   257 # be useful for C code in case the coding convention dictates that all compound 
   258 # types are typedef'ed and only the typedef is referenced, never the tag name.
   259 
   260 TYPEDEF_HIDES_STRUCT   = NO
   261 
   262 #---------------------------------------------------------------------------
   263 # Build related configuration options
   264 #---------------------------------------------------------------------------
   265 
   266 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
   267 # documentation are documented, even if no documentation was available. 
   268 # Private class members and static file members will be hidden unless 
   269 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
   270 
   271 EXTRACT_ALL            = NO
   272 
   273 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
   274 # will be included in the documentation.
   275 
   276 EXTRACT_PRIVATE        = NO
   277 
   278 # If the EXTRACT_STATIC tag is set to YES all static members of a file 
   279 # will be included in the documentation.
   280 
   281 EXTRACT_STATIC         = NO
   282 
   283 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
   284 # defined locally in source files will be included in the documentation. 
   285 # If set to NO only classes defined in header files are included.
   286 
   287 EXTRACT_LOCAL_CLASSES  = YES
   288 
   289 # This flag is only useful for Objective-C code. When set to YES local 
   290 # methods, which are defined in the implementation section but not in 
   291 # the interface are included in the documentation. 
   292 # If set to NO (the default) only methods in the interface are included.
   293 
   294 EXTRACT_LOCAL_METHODS  = NO
   295 
   296 # If this flag is set to YES, the members of anonymous namespaces will be 
   297 # extracted and appear in the documentation as a namespace called 
   298 # 'anonymous_namespace{file}', where file will be replaced with the base 
   299 # name of the file that contains the anonymous namespace. By default 
   300 # anonymous namespace are hidden.
   301 
   302 EXTRACT_ANON_NSPACES   = NO
   303 
   304 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
   305 # undocumented members of documented classes, files or namespaces. 
   306 # If set to NO (the default) these members will be included in the 
   307 # various overviews, but no documentation section is generated. 
   308 # This option has no effect if EXTRACT_ALL is enabled.
   309 
   310 HIDE_UNDOC_MEMBERS     = NO
   311 
   312 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
   313 # undocumented classes that are normally visible in the class hierarchy. 
   314 # If set to NO (the default) these classes will be included in the various 
   315 # overviews. This option has no effect if EXTRACT_ALL is enabled.
   316 
   317 HIDE_UNDOC_CLASSES     = NO
   318 
   319 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
   320 # friend (class|struct|union) declarations. 
   321 # If set to NO (the default) these declarations will be included in the 
   322 # documentation.
   323 
   324 HIDE_FRIEND_COMPOUNDS  = NO
   325 
   326 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
   327 # documentation blocks found inside the body of a function. 
   328 # If set to NO (the default) these blocks will be appended to the 
   329 # function's detailed documentation block.
   330 
   331 HIDE_IN_BODY_DOCS      = NO
   332 
   333 # The INTERNAL_DOCS tag determines if documentation 
   334 # that is typed after a \internal command is included. If the tag is set 
   335 # to NO (the default) then the documentation will be excluded. 
   336 # Set it to YES to include the internal documentation.
   337 
   338 INTERNAL_DOCS          = NO
   339 
   340 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
   341 # file names in lower-case letters. If set to YES upper-case letters are also 
   342 # allowed. This is useful if you have classes or files whose names only differ 
   343 # in case and if your file system supports case sensitive file names. Windows 
   344 # and Mac users are advised to set this option to NO.
   345 
   346 CASE_SENSE_NAMES       = YES
   347 
   348 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
   349 # will show members with their full class and namespace scopes in the 
   350 # documentation. If set to YES the scope will be hidden.
   351 
   352 HIDE_SCOPE_NAMES       = NO
   353 
   354 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
   355 # will put a list of the files that are included by a file in the documentation 
   356 # of that file.
   357 
   358 SHOW_INCLUDE_FILES     = YES
   359 
   360 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
   361 # is inserted in the documentation for inline members.
   362 
   363 INLINE_INFO            = YES
   364 
   365 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
   366 # will sort the (detailed) documentation of file and class members 
   367 # alphabetically by member name. If set to NO the members will appear in 
   368 # declaration order.
   369 
   370 SORT_MEMBER_DOCS       = YES
   371 
   372 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
   373 # brief documentation of file, namespace and class members alphabetically 
   374 # by member name. If set to NO (the default) the members will appear in 
   375 # declaration order.
   376 
   377 SORT_BRIEF_DOCS        = NO
   378 
   379 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the 
   380 # hierarchy of group names into alphabetical order. If set to NO (the default) 
   381 # the group names will appear in their defined order.
   382 
   383 SORT_GROUP_NAMES       = NO
   384 
   385 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
   386 # sorted by fully-qualified names, including namespaces. If set to 
   387 # NO (the default), the class list will be sorted only by class name, 
   388 # not including the namespace part. 
   389 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
   390 # Note: This option applies only to the class list, not to the 
   391 # alphabetical list.
   392 
   393 SORT_BY_SCOPE_NAME     = NO
   394 
   395 # The GENERATE_TODOLIST tag can be used to enable (YES) or 
   396 # disable (NO) the todo list. This list is created by putting \todo 
   397 # commands in the documentation.
   398 
   399 GENERATE_TODOLIST      = YES
   400 
   401 # The GENERATE_TESTLIST tag can be used to enable (YES) or 
   402 # disable (NO) the test list. This list is created by putting \test 
   403 # commands in the documentation.
   404 
   405 GENERATE_TESTLIST      = YES
   406 
   407 # The GENERATE_BUGLIST tag can be used to enable (YES) or 
   408 # disable (NO) the bug list. This list is created by putting \bug 
   409 # commands in the documentation.
   410 
   411 GENERATE_BUGLIST       = YES
   412 
   413 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
   414 # disable (NO) the deprecated list. This list is created by putting 
   415 # \deprecated commands in the documentation.
   416 
   417 GENERATE_DEPRECATEDLIST= YES
   418 
   419 # The ENABLED_SECTIONS tag can be used to enable conditional 
   420 # documentation sections, marked by \if sectionname ... \endif.
   421 
   422 ENABLED_SECTIONS       = 
   423 
   424 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
   425 # the initial value of a variable or define consists of for it to appear in 
   426 # the documentation. If the initializer consists of more lines than specified 
   427 # here it will be hidden. Use a value of 0 to hide initializers completely. 
   428 # The appearance of the initializer of individual variables and defines in the 
   429 # documentation can be controlled using \showinitializer or \hideinitializer 
   430 # command in the documentation regardless of this setting.
   431 
   432 MAX_INITIALIZER_LINES  = 30
   433 
   434 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
   435 # at the bottom of the documentation of classes and structs. If set to YES the 
   436 # list will mention the files that were used to generate the documentation.
   437 
   438 SHOW_USED_FILES        = YES
   439 
   440 # If the sources in your project are distributed over multiple directories 
   441 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 
   442 # in the documentation. The default is NO.
   443 
   444 SHOW_DIRECTORIES       = NO
   445 
   446 # The FILE_VERSION_FILTER tag can be used to specify a program or script that 
   447 # doxygen should invoke to get the current version for each file (typically from 
   448 # the version control system). Doxygen will invoke the program by executing (via 
   449 # popen()) the command <command> <input-file>, where <command> is the value of 
   450 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 
   451 # provided by doxygen. Whatever the program writes to standard output 
   452 # is used as the file version. See the manual for examples.
   453 
   454 FILE_VERSION_FILTER    = 
   455 
   456 #---------------------------------------------------------------------------
   457 # configuration options related to warning and progress messages
   458 #---------------------------------------------------------------------------
   459 
   460 # The QUIET tag can be used to turn on/off the messages that are generated 
   461 # by doxygen. Possible values are YES and NO. If left blank NO is used.
   462 
   463 QUIET                  = NO
   464 
   465 # The WARNINGS tag can be used to turn on/off the warning messages that are 
   466 # generated by doxygen. Possible values are YES and NO. If left blank 
   467 # NO is used.
   468 
   469 WARNINGS               = YES
   470 
   471 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
   472 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
   473 # automatically be disabled.
   474 
   475 WARN_IF_UNDOCUMENTED   = YES
   476 
   477 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
   478 # potential errors in the documentation, such as not documenting some 
   479 # parameters in a documented function, or documenting parameters that 
   480 # don't exist or using markup commands wrongly.
   481 
   482 WARN_IF_DOC_ERROR      = YES
   483 
   484 # This WARN_NO_PARAMDOC option can be abled to get warnings for 
   485 # functions that are documented, but have no documentation for their parameters 
   486 # or return value. If set to NO (the default) doxygen will only warn about 
   487 # wrong or incomplete parameter documentation, but not about the absence of 
   488 # documentation.
   489 
   490 WARN_NO_PARAMDOC       = NO
   491 
   492 # The WARN_FORMAT tag determines the format of the warning messages that 
   493 # doxygen can produce. The string should contain the $file, $line, and $text 
   494 # tags, which will be replaced by the file and line number from which the 
   495 # warning originated and the warning text. Optionally the format may contain 
   496 # $version, which will be replaced by the version of the file (if it could 
   497 # be obtained via FILE_VERSION_FILTER)
   498 
   499 WARN_FORMAT            = "$file:$line: $text"
   500 
   501 # The WARN_LOGFILE tag can be used to specify a file to which warning 
   502 # and error messages should be written. If left blank the output is written 
   503 # to stderr.
   504 
   505 WARN_LOGFILE           = 
   506 
   507 #---------------------------------------------------------------------------
   508 # configuration options related to the input files
   509 #---------------------------------------------------------------------------
   510 
   511 # The INPUT tag can be used to specify the files and/or directories that contain 
   512 # documented source files. You may enter file names like "myfile.cpp" or 
   513 # directories like "/usr/src/myproject". Separate the files or directories 
   514 # with spaces.
   515 
   516 INPUT                  = 
   517 
   518 # This tag can be used to specify the character encoding of the source files 
   519 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is 
   520 # also the default input encoding. Doxygen uses libiconv (or the iconv built 
   521 # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for 
   522 # the list of possible encodings.
   523 
   524 INPUT_ENCODING         = UTF-8
   525 
   526 # If the value of the INPUT tag contains directories, you can use the 
   527 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
   528 # and *.h) to filter out the source-files in the directories. If left 
   529 # blank the following patterns are tested: 
   530 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 
   531 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
   532 
   533 FILE_PATTERNS          = 
   534 
   535 # The RECURSIVE tag can be used to turn specify whether or not subdirectories 
   536 # should be searched for input files as well. Possible values are YES and NO. 
   537 # If left blank NO is used.
   538 
   539 RECURSIVE              = NO
   540 
   541 # The EXCLUDE tag can be used to specify files and/or directories that should 
   542 # excluded from the INPUT source files. This way you can easily exclude a 
   543 # subdirectory from a directory tree whose root is specified with the INPUT tag.
   544 
   545 EXCLUDE                = 
   546 
   547 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or 
   548 # directories that are symbolic links (a Unix filesystem feature) are excluded 
   549 # from the input.
   550 
   551 EXCLUDE_SYMLINKS       = NO
   552 
   553 # If the value of the INPUT tag contains directories, you can use the 
   554 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
   555 # certain files from those directories. Note that the wildcards are matched 
   556 # against the file with absolute path, so to exclude all test directories 
   557 # for example use the pattern */test/*
   558 
   559 EXCLUDE_PATTERNS       = 
   560 
   561 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names 
   562 # (namespaces, classes, functions, etc.) that should be excluded from the 
   563 # output. The symbol name can be a fully qualified name, a word, or if the 
   564 # wildcard * is used, a substring. Examples: ANamespace, AClass, 
   565 # AClass::ANamespace, ANamespace::*Test
   566 
   567 EXCLUDE_SYMBOLS        = 
   568 
   569 # The EXAMPLE_PATH tag can be used to specify one or more files or 
   570 # directories that contain example code fragments that are included (see 
   571 # the \include command).
   572 
   573 EXAMPLE_PATH           = 
   574 
   575 # If the value of the EXAMPLE_PATH tag contains directories, you can use the 
   576 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
   577 # and *.h) to filter out the source-files in the directories. If left 
   578 # blank all files are included.
   579 
   580 EXAMPLE_PATTERNS       = 
   581 
   582 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
   583 # searched for input files to be used with the \include or \dontinclude 
   584 # commands irrespective of the value of the RECURSIVE tag. 
   585 # Possible values are YES and NO. If left blank NO is used.
   586 
   587 EXAMPLE_RECURSIVE      = NO
   588 
   589 # The IMAGE_PATH tag can be used to specify one or more files or 
   590 # directories that contain image that are included in the documentation (see 
   591 # the \image command).
   592 
   593 IMAGE_PATH             = 
   594 
   595 # The INPUT_FILTER tag can be used to specify a program that doxygen should 
   596 # invoke to filter for each input file. Doxygen will invoke the filter program 
   597 # by executing (via popen()) the command <filter> <input-file>, where <filter> 
   598 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
   599 # input file. Doxygen will then use the output that the filter program writes 
   600 # to standard output.  If FILTER_PATTERNS is specified, this tag will be 
   601 # ignored.
   602 
   603 INPUT_FILTER           = 
   604 
   605 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
   606 # basis.  Doxygen will compare the file name with each pattern and apply the 
   607 # filter if there is a match.  The filters are a list of the form: 
   608 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
   609 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
   610 # is applied to all files.
   611 
   612 FILTER_PATTERNS        = 
   613 
   614 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
   615 # INPUT_FILTER) will be used to filter the input files when producing source 
   616 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
   617 
   618 FILTER_SOURCE_FILES    = NO
   619 
   620 #---------------------------------------------------------------------------
   621 # configuration options related to source browsing
   622 #---------------------------------------------------------------------------
   623 
   624 # If the SOURCE_BROWSER tag is set to YES then a list of source files will 
   625 # be generated. Documented entities will be cross-referenced with these sources. 
   626 # Note: To get rid of all source code in the generated output, make sure also 
   627 # VERBATIM_HEADERS is set to NO.
   628 
   629 SOURCE_BROWSER         = NO
   630 
   631 # Setting the INLINE_SOURCES tag to YES will include the body 
   632 # of functions and classes directly in the documentation.
   633 
   634 INLINE_SOURCES         = NO
   635 
   636 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
   637 # doxygen to hide any special comment blocks from generated source code 
   638 # fragments. Normal C and C++ comments will always remain visible.
   639 
   640 STRIP_CODE_COMMENTS    = YES
   641 
   642 # If the REFERENCED_BY_RELATION tag is set to YES (the default) 
   643 # then for each documented function all documented 
   644 # functions referencing it will be listed.
   645 
   646 REFERENCED_BY_RELATION = NO
   647 
   648 # If the REFERENCES_RELATION tag is set to YES (the default) 
   649 # then for each documented function all documented entities 
   650 # called/used by that function will be listed.
   651 
   652 REFERENCES_RELATION    = NO
   653 
   654 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
   655 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
   656 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
   657 # link to the source code.  Otherwise they will link to the documentstion.
   658 
   659 REFERENCES_LINK_SOURCE = YES
   660 
   661 # If the USE_HTAGS tag is set to YES then the references to source code 
   662 # will point to the HTML generated by the htags(1) tool instead of doxygen 
   663 # built-in source browser. The htags tool is part of GNU's global source 
   664 # tagging system (see http://www.gnu.org/software/global/global.html). You 
   665 # will need version 4.8.6 or higher.
   666 
   667 USE_HTAGS              = NO
   668 
   669 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
   670 # will generate a verbatim copy of the header file for each class for 
   671 # which an include is specified. Set to NO to disable this.
   672 
   673 VERBATIM_HEADERS       = YES
   674 
   675 #---------------------------------------------------------------------------
   676 # configuration options related to the alphabetical class index
   677 #---------------------------------------------------------------------------
   678 
   679 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
   680 # of all compounds will be generated. Enable this if the project 
   681 # contains a lot of classes, structs, unions or interfaces.
   682 
   683 ALPHABETICAL_INDEX     = NO
   684 
   685 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
   686 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
   687 # in which this list will be split (can be a number in the range [1..20])
   688 
   689 COLS_IN_ALPHA_INDEX    = 5
   690 
   691 # In case all classes in a project start with a common prefix, all 
   692 # classes will be put under the same header in the alphabetical index. 
   693 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
   694 # should be ignored while generating the index headers.
   695 
   696 IGNORE_PREFIX          = 
   697 
   698 #---------------------------------------------------------------------------
   699 # configuration options related to the HTML output
   700 #---------------------------------------------------------------------------
   701 
   702 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
   703 # generate HTML output.
   704 
   705 GENERATE_HTML          = YES
   706 
   707 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
   708 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   709 # put in front of it. If left blank `html' will be used as the default path.
   710 
   711 HTML_OUTPUT            = html
   712 
   713 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
   714 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
   715 # doxygen will generate files with .html extension.
   716 
   717 HTML_FILE_EXTENSION    = .html
   718 
   719 # The HTML_HEADER tag can be used to specify a personal HTML header for 
   720 # each generated HTML page. If it is left blank doxygen will generate a 
   721 # standard header.
   722 
   723 HTML_HEADER            = 
   724 
   725 # The HTML_FOOTER tag can be used to specify a personal HTML footer for 
   726 # each generated HTML page. If it is left blank doxygen will generate a 
   727 # standard footer.
   728 
   729 HTML_FOOTER            = 
   730 
   731 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
   732 # style sheet that is used by each HTML page. It can be used to 
   733 # fine-tune the look of the HTML output. If the tag is left blank doxygen 
   734 # will generate a default style sheet. Note that doxygen will try to copy 
   735 # the style sheet file to the HTML output directory, so don't put your own 
   736 # stylesheet in the HTML output directory as well, or it will be erased!
   737 
   738 HTML_STYLESHEET        = 
   739 
   740 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
   741 # files or namespaces will be aligned in HTML using tables. If set to 
   742 # NO a bullet list will be used.
   743 
   744 HTML_ALIGN_MEMBERS     = YES
   745 
   746 # If the GENERATE_HTMLHELP tag is set to YES, additional index files 
   747 # will be generated that can be used as input for tools like the 
   748 # Microsoft HTML help workshop to generate a compiled HTML help file (.chm) 
   749 # of the generated HTML documentation.
   750 
   751 GENERATE_HTMLHELP      = NO
   752 
   753 # If the GENERATE_DOCSET tag is set to YES, additional index files 
   754 # will be generated that can be used as input for Apple's Xcode 3 
   755 # integrated development environment, introduced with OSX 10.5 (Leopard). 
   756 # To create a documentation set, doxygen will generate a Makefile in the 
   757 # HTML output directory. Running make will produce the docset in that 
   758 # directory and running "make install" will install the docset in 
   759 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find 
   760 # it at startup.
   761 
   762 GENERATE_DOCSET        = NO
   763 
   764 # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the 
   765 # feed. A documentation feed provides an umbrella under which multiple 
   766 # documentation sets from a single provider (such as a company or product suite) 
   767 # can be grouped.
   768 
   769 DOCSET_FEEDNAME        = "Doxygen generated docs"
   770 
   771 # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that 
   772 # should uniquely identify the documentation set bundle. This should be a 
   773 # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen 
   774 # will append .docset to the name.
   775 
   776 DOCSET_BUNDLE_ID       = org.doxygen.Project
   777 
   778 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML 
   779 # documentation will contain sections that can be hidden and shown after the 
   780 # page has loaded. For this to work a browser that supports 
   781 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox 
   782 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
   783 
   784 HTML_DYNAMIC_SECTIONS  = NO
   785 
   786 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
   787 # be used to specify the file name of the resulting .chm file. You 
   788 # can add a path in front of the file if the result should not be 
   789 # written to the html output directory.
   790 
   791 CHM_FILE               = 
   792 
   793 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
   794 # be used to specify the location (absolute path including file name) of 
   795 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
   796 # the HTML help compiler on the generated index.hhp.
   797 
   798 HHC_LOCATION           = 
   799 
   800 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
   801 # controls if a separate .chi index file is generated (YES) or that 
   802 # it should be included in the master .chm file (NO).
   803 
   804 GENERATE_CHI           = NO
   805 
   806 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
   807 # controls whether a binary table of contents is generated (YES) or a 
   808 # normal table of contents (NO) in the .chm file.
   809 
   810 BINARY_TOC             = NO
   811 
   812 # The TOC_EXPAND flag can be set to YES to add extra items for group members 
   813 # to the contents of the HTML help documentation and to the tree view.
   814 
   815 TOC_EXPAND             = NO
   816 
   817 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
   818 # top of each HTML page. The value NO (the default) enables the index and 
   819 # the value YES disables it.
   820 
   821 DISABLE_INDEX          = NO
   822 
   823 # This tag can be used to set the number of enum values (range [1..20]) 
   824 # that doxygen will group on one line in the generated HTML documentation.
   825 
   826 ENUM_VALUES_PER_LINE   = 4
   827 
   828 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
   829 # generated containing a tree-like index structure (just like the one that 
   830 # is generated for HTML Help). For this to work a browser that supports 
   831 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
   832 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
   833 # probably better off using the HTML help feature.
   834 
   835 GENERATE_TREEVIEW      = NO
   836 
   837 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
   838 # used to set the initial width (in pixels) of the frame in which the tree 
   839 # is shown.
   840 
   841 TREEVIEW_WIDTH         = 250
   842 
   843 #---------------------------------------------------------------------------
   844 # configuration options related to the LaTeX output
   845 #---------------------------------------------------------------------------
   846 
   847 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
   848 # generate Latex output.
   849 
   850 GENERATE_LATEX         = YES
   851 
   852 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
   853 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   854 # put in front of it. If left blank `latex' will be used as the default path.
   855 
   856 LATEX_OUTPUT           = latex
   857 
   858 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
   859 # invoked. If left blank `latex' will be used as the default command name.
   860 
   861 LATEX_CMD_NAME         = latex
   862 
   863 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
   864 # generate index for LaTeX. If left blank `makeindex' will be used as the 
   865 # default command name.
   866 
   867 MAKEINDEX_CMD_NAME     = makeindex
   868 
   869 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
   870 # LaTeX documents. This may be useful for small projects and may help to 
   871 # save some trees in general.
   872 
   873 COMPACT_LATEX          = NO
   874 
   875 # The PAPER_TYPE tag can be used to set the paper type that is used 
   876 # by the printer. Possible values are: a4, a4wide, letter, legal and 
   877 # executive. If left blank a4wide will be used.
   878 
   879 PAPER_TYPE             = a4wide
   880 
   881 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
   882 # packages that should be included in the LaTeX output.
   883 
   884 EXTRA_PACKAGES         = 
   885 
   886 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
   887 # the generated latex document. The header should contain everything until 
   888 # the first chapter. If it is left blank doxygen will generate a 
   889 # standard header. Notice: only use this tag if you know what you are doing!
   890 
   891 LATEX_HEADER           = 
   892 
   893 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
   894 # is prepared for conversion to pdf (using ps2pdf). The pdf file will 
   895 # contain links (just like the HTML output) instead of page references 
   896 # This makes the output suitable for online browsing using a pdf viewer.
   897 
   898 PDF_HYPERLINKS         = YES
   899 
   900 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
   901 # plain latex in the generated Makefile. Set this option to YES to get a 
   902 # higher quality PDF documentation.
   903 
   904 USE_PDFLATEX           = YES
   905 
   906 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
   907 # command to the generated LaTeX files. This will instruct LaTeX to keep 
   908 # running if errors occur, instead of asking the user for help. 
   909 # This option is also used when generating formulas in HTML.
   910 
   911 LATEX_BATCHMODE        = NO
   912 
   913 # If LATEX_HIDE_INDICES is set to YES then doxygen will not 
   914 # include the index chapters (such as File Index, Compound Index, etc.) 
   915 # in the output.
   916 
   917 LATEX_HIDE_INDICES     = NO
   918 
   919 #---------------------------------------------------------------------------
   920 # configuration options related to the RTF output
   921 #---------------------------------------------------------------------------
   922 
   923 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
   924 # The RTF output is optimized for Word 97 and may not look very pretty with 
   925 # other RTF readers or editors.
   926 
   927 GENERATE_RTF           = NO
   928 
   929 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
   930 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   931 # put in front of it. If left blank `rtf' will be used as the default path.
   932 
   933 RTF_OUTPUT             = rtf
   934 
   935 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
   936 # RTF documents. This may be useful for small projects and may help to 
   937 # save some trees in general.
   938 
   939 COMPACT_RTF            = NO
   940 
   941 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
   942 # will contain hyperlink fields. The RTF file will 
   943 # contain links (just like the HTML output) instead of page references. 
   944 # This makes the output suitable for online browsing using WORD or other 
   945 # programs which support those fields. 
   946 # Note: wordpad (write) and others do not support links.
   947 
   948 RTF_HYPERLINKS         = NO
   949 
   950 # Load stylesheet definitions from file. Syntax is similar to doxygen's 
   951 # config file, i.e. a series of assignments. You only have to provide 
   952 # replacements, missing definitions are set to their default value.
   953 
   954 RTF_STYLESHEET_FILE    = 
   955 
   956 # Set optional variables used in the generation of an rtf document. 
   957 # Syntax is similar to doxygen's config file.
   958 
   959 RTF_EXTENSIONS_FILE    = 
   960 
   961 #---------------------------------------------------------------------------
   962 # configuration options related to the man page output
   963 #---------------------------------------------------------------------------
   964 
   965 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
   966 # generate man pages
   967 
   968 GENERATE_MAN           = NO
   969 
   970 # The MAN_OUTPUT tag is used to specify where the man pages will be put. 
   971 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
   972 # put in front of it. If left blank `man' will be used as the default path.
   973 
   974 MAN_OUTPUT             = man
   975 
   976 # The MAN_EXTENSION tag determines the extension that is added to 
   977 # the generated man pages (default is the subroutine's section .3)
   978 
   979 MAN_EXTENSION          = .3
   980 
   981 # If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
   982 # then it will generate one additional man file for each entity 
   983 # documented in the real man page(s). These additional files 
   984 # only source the real man page, but without them the man command 
   985 # would be unable to find the correct page. The default is NO.
   986 
   987 MAN_LINKS              = NO
   988 
   989 #---------------------------------------------------------------------------
   990 # configuration options related to the XML output
   991 #---------------------------------------------------------------------------
   992 
   993 # If the GENERATE_XML tag is set to YES Doxygen will 
   994 # generate an XML file that captures the structure of 
   995 # the code including all documentation.
   996 
   997 GENERATE_XML           = NO
   998 
   999 # The XML_OUTPUT tag is used to specify where the XML pages will be put. 
  1000 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
  1001 # put in front of it. If left blank `xml' will be used as the default path.
  1002 
  1003 XML_OUTPUT             = xml
  1004 
  1005 # The XML_SCHEMA tag can be used to specify an XML schema, 
  1006 # which can be used by a validating XML parser to check the 
  1007 # syntax of the XML files.
  1008 
  1009 XML_SCHEMA             = 
  1010 
  1011 # The XML_DTD tag can be used to specify an XML DTD, 
  1012 # which can be used by a validating XML parser to check the 
  1013 # syntax of the XML files.
  1014 
  1015 XML_DTD                = 
  1016 
  1017 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
  1018 # dump the program listings (including syntax highlighting 
  1019 # and cross-referencing information) to the XML output. Note that 
  1020 # enabling this will significantly increase the size of the XML output.
  1021 
  1022 XML_PROGRAMLISTING     = YES
  1023 
  1024 #---------------------------------------------------------------------------
  1025 # configuration options for the AutoGen Definitions output
  1026 #---------------------------------------------------------------------------
  1027 
  1028 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
  1029 # generate an AutoGen Definitions (see autogen.sf.net) file 
  1030 # that captures the structure of the code including all 
  1031 # documentation. Note that this feature is still experimental 
  1032 # and incomplete at the moment.
  1033 
  1034 GENERATE_AUTOGEN_DEF   = NO
  1035 
  1036 #---------------------------------------------------------------------------
  1037 # configuration options related to the Perl module output
  1038 #---------------------------------------------------------------------------
  1039 
  1040 # If the GENERATE_PERLMOD tag is set to YES Doxygen will 
  1041 # generate a Perl module file that captures the structure of 
  1042 # the code including all documentation. Note that this 
  1043 # feature is still experimental and incomplete at the 
  1044 # moment.
  1045 
  1046 GENERATE_PERLMOD       = NO
  1047 
  1048 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
  1049 # the necessary Makefile rules, Perl scripts and LaTeX code to be able 
  1050 # to generate PDF and DVI output from the Perl module output.
  1051 
  1052 PERLMOD_LATEX          = NO
  1053 
  1054 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
  1055 # nicely formatted so it can be parsed by a human reader.  This is useful 
  1056 # if you want to understand what is going on.  On the other hand, if this 
  1057 # tag is set to NO the size of the Perl module output will be much smaller 
  1058 # and Perl will parse it just the same.
  1059 
  1060 PERLMOD_PRETTY         = YES
  1061 
  1062 # The names of the make variables in the generated doxyrules.make file 
  1063 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
  1064 # This is useful so different doxyrules.make files included by the same 
  1065 # Makefile don't overwrite each other's variables.
  1066 
  1067 PERLMOD_MAKEVAR_PREFIX = 
  1068 
  1069 #---------------------------------------------------------------------------
  1070 # Configuration options related to the preprocessor   
  1071 #---------------------------------------------------------------------------
  1072 
  1073 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
  1074 # evaluate all C-preprocessor directives found in the sources and include 
  1075 # files.
  1076 
  1077 ENABLE_PREPROCESSING   = YES
  1078 
  1079 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
  1080 # names in the source code. If set to NO (the default) only conditional 
  1081 # compilation will be performed. Macro expansion can be done in a controlled 
  1082 # way by setting EXPAND_ONLY_PREDEF to YES.
  1083 
  1084 MACRO_EXPANSION        = NO
  1085 
  1086 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
  1087 # then the macro expansion is limited to the macros specified with the 
  1088 # PREDEFINED and EXPAND_AS_DEFINED tags.
  1089 
  1090 EXPAND_ONLY_PREDEF     = NO
  1091 
  1092 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
  1093 # in the INCLUDE_PATH (see below) will be search if a #include is found.
  1094 
  1095 SEARCH_INCLUDES        = YES
  1096 
  1097 # The INCLUDE_PATH tag can be used to specify one or more directories that 
  1098 # contain include files that are not input files but should be processed by 
  1099 # the preprocessor.
  1100 
  1101 INCLUDE_PATH           = 
  1102 
  1103 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
  1104 # patterns (like *.h and *.hpp) to filter out the header-files in the 
  1105 # directories. If left blank, the patterns specified with FILE_PATTERNS will 
  1106 # be used.
  1107 
  1108 INCLUDE_FILE_PATTERNS  = 
  1109 
  1110 # The PREDEFINED tag can be used to specify one or more macro names that 
  1111 # are defined before the preprocessor is started (similar to the -D option of 
  1112 # gcc). The argument of the tag is a list of macros of the form: name 
  1113 # or name=definition (no spaces). If the definition and the = are 
  1114 # omitted =1 is assumed. To prevent a macro definition from being 
  1115 # undefined via #undef or recursively expanded use the := operator 
  1116 # instead of the = operator.
  1117 
  1118 PREDEFINED             = 
  1119 
  1120 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
  1121 # this tag can be used to specify a list of macro names that should be expanded. 
  1122 # The macro definition that is found in the sources will be used. 
  1123 # Use the PREDEFINED tag if you want to use a different macro definition.
  1124 
  1125 EXPAND_AS_DEFINED      = 
  1126 
  1127 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
  1128 # doxygen's preprocessor will remove all function-like macros that are alone 
  1129 # on a line, have an all uppercase name, and do not end with a semicolon. Such 
  1130 # function macros are typically used for boiler-plate code, and will confuse 
  1131 # the parser if not removed.
  1132 
  1133 SKIP_FUNCTION_MACROS   = YES
  1134 
  1135 #---------------------------------------------------------------------------
  1136 # Configuration::additions related to external references   
  1137 #---------------------------------------------------------------------------
  1138 
  1139 # The TAGFILES option can be used to specify one or more tagfiles. 
  1140 # Optionally an initial location of the external documentation 
  1141 # can be added for each tagfile. The format of a tag file without 
  1142 # this location is as follows: 
  1143 #   TAGFILES = file1 file2 ... 
  1144 # Adding location for the tag files is done as follows: 
  1145 #   TAGFILES = file1=loc1 "file2 = loc2" ... 
  1146 # where "loc1" and "loc2" can be relative or absolute paths or 
  1147 # URLs. If a location is present for each tag, the installdox tool 
  1148 # does not have to be run to correct the links.
  1149 # Note that each tag file must have a unique name
  1150 # (where the name does NOT include the path)
  1151 # If a tag file is not located in the directory in which doxygen 
  1152 # is run, you must also specify the path to the tagfile here.
  1153 
  1154 TAGFILES               = 
  1155 
  1156 # When a file name is specified after GENERATE_TAGFILE, doxygen will create 
  1157 # a tag file that is based on the input files it reads.
  1158 
  1159 GENERATE_TAGFILE       = 
  1160 
  1161 # If the ALLEXTERNALS tag is set to YES all external classes will be listed 
  1162 # in the class index. If set to NO only the inherited external classes 
  1163 # will be listed.
  1164 
  1165 ALLEXTERNALS           = NO
  1166 
  1167 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
  1168 # in the modules index. If set to NO, only the current project's groups will 
  1169 # be listed.
  1170 
  1171 EXTERNAL_GROUPS        = YES
  1172 
  1173 # The PERL_PATH should be the absolute path and name of the perl script 
  1174 # interpreter (i.e. the result of `which perl').
  1175 
  1176 PERL_PATH              = /usr/bin/perl
  1177 
  1178 #---------------------------------------------------------------------------
  1179 # Configuration options related to the dot tool   
  1180 #---------------------------------------------------------------------------
  1181 
  1182 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
  1183 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 
  1184 # or super classes. Setting the tag to NO turns the diagrams off. Note that 
  1185 # this option is superseded by the HAVE_DOT option below. This is only a 
  1186 # fallback. It is recommended to install and use dot, since it yields more 
  1187 # powerful graphs.
  1188 
  1189 CLASS_DIAGRAMS         = YES
  1190 
  1191 # You can define message sequence charts within doxygen comments using the \msc 
  1192 # command. Doxygen will then run the mscgen tool (see 
  1193 # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the 
  1194 # documentation. The MSCGEN_PATH tag allows you to specify the directory where 
  1195 # the mscgen tool resides. If left empty the tool is assumed to be found in the 
  1196 # default search path.
  1197 
  1198 MSCGEN_PATH            = 
  1199 
  1200 # If set to YES, the inheritance and collaboration graphs will hide 
  1201 # inheritance and usage relations if the target is undocumented 
  1202 # or is not a class.
  1203 
  1204 HIDE_UNDOC_RELATIONS   = YES
  1205 
  1206 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
  1207 # available from the path. This tool is part of Graphviz, a graph visualization 
  1208 # toolkit from AT&T and Lucent Bell Labs. The other options in this section 
  1209 # have no effect if this option is set to NO (the default)
  1210 
  1211 HAVE_DOT               = NO
  1212 
  1213 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
  1214 # will generate a graph for each documented class showing the direct and 
  1215 # indirect inheritance relations. Setting this tag to YES will force the 
  1216 # the CLASS_DIAGRAMS tag to NO.
  1217 
  1218 CLASS_GRAPH            = YES
  1219 
  1220 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
  1221 # will generate a graph for each documented class showing the direct and 
  1222 # indirect implementation dependencies (inheritance, containment, and 
  1223 # class references variables) of the class with other documented classes.
  1224 
  1225 COLLABORATION_GRAPH    = YES
  1226 
  1227 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 
  1228 # will generate a graph for groups, showing the direct groups dependencies
  1229 
  1230 GROUP_GRAPHS           = YES
  1231 
  1232 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
  1233 # collaboration diagrams in a style similar to the OMG's Unified Modeling 
  1234 # Language.
  1235 
  1236 UML_LOOK               = NO
  1237 
  1238 # If set to YES, the inheritance and collaboration graphs will show the 
  1239 # relations between templates and their instances.
  1240 
  1241 TEMPLATE_RELATIONS     = NO
  1242 
  1243 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
  1244 # tags are set to YES then doxygen will generate a graph for each documented 
  1245 # file showing the direct and indirect include dependencies of the file with 
  1246 # other documented files.
  1247 
  1248 INCLUDE_GRAPH          = YES
  1249 
  1250 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
  1251 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
  1252 # documented header file showing the documented files that directly or 
  1253 # indirectly include this file.
  1254 
  1255 INCLUDED_BY_GRAPH      = YES
  1256 
  1257 # If the CALL_GRAPH and HAVE_DOT options are set to YES then 
  1258 # doxygen will generate a call dependency graph for every global function 
  1259 # or class method. Note that enabling this option will significantly increase 
  1260 # the time of a run. So in most cases it will be better to enable call graphs 
  1261 # for selected functions only using the \callgraph command.
  1262 
  1263 CALL_GRAPH             = NO
  1264 
  1265 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then 
  1266 # doxygen will generate a caller dependency graph for every global function 
  1267 # or class method. Note that enabling this option will significantly increase 
  1268 # the time of a run. So in most cases it will be better to enable caller 
  1269 # graphs for selected functions only using the \callergraph command.
  1270 
  1271 CALLER_GRAPH           = NO
  1272 
  1273 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
  1274 # will graphical hierarchy of all classes instead of a textual one.
  1275 
  1276 GRAPHICAL_HIERARCHY    = YES
  1277 
  1278 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 
  1279 # then doxygen will show the dependencies a directory has on other directories 
  1280 # in a graphical way. The dependency relations are determined by the #include
  1281 # relations between the files in the directories.
  1282 
  1283 DIRECTORY_GRAPH        = YES
  1284 
  1285 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
  1286 # generated by dot. Possible values are png, jpg, or gif
  1287 # If left blank png will be used.
  1288 
  1289 DOT_IMAGE_FORMAT       = png
  1290 
  1291 # The tag DOT_PATH can be used to specify the path where the dot tool can be 
  1292 # found. If left blank, it is assumed the dot tool can be found in the path.
  1293 
  1294 DOT_PATH               = 
  1295 
  1296 # The DOTFILE_DIRS tag can be used to specify one or more directories that 
  1297 # contain dot files that are included in the documentation (see the 
  1298 # \dotfile command).
  1299 
  1300 DOTFILE_DIRS           = 
  1301 
  1302 # The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of 
  1303 # nodes that will be shown in the graph. If the number of nodes in a graph 
  1304 # becomes larger than this value, doxygen will truncate the graph, which is 
  1305 # visualized by representing a node as a red box. Note that doxygen if the 
  1306 # number of direct children of the root node in a graph is already larger than 
  1307 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note 
  1308 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
  1309 
  1310 DOT_GRAPH_MAX_NODES    = 50
  1311 
  1312 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
  1313 # graphs generated by dot. A depth value of 3 means that only nodes reachable 
  1314 # from the root by following a path via at most 3 edges will be shown. Nodes 
  1315 # that lay further from the root node will be omitted. Note that setting this 
  1316 # option to 1 or 2 may greatly reduce the computation time needed for large 
  1317 # code bases. Also note that the size of a graph can be further restricted by 
  1318 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
  1319 
  1320 MAX_DOT_GRAPH_DEPTH    = 0
  1321 
  1322 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 
  1323 # background. This is enabled by default, which results in a transparent 
  1324 # background. Warning: Depending on the platform used, enabling this option 
  1325 # may lead to badly anti-aliased labels on the edges of a graph (i.e. they 
  1326 # become hard to read).
  1327 
  1328 DOT_TRANSPARENT        = YES
  1329 
  1330 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 
  1331 # files in one run (i.e. multiple -o and -T options on the command line). This 
  1332 # makes dot run faster, but since only newer versions of dot (>1.8.10) 
  1333 # support this, this feature is disabled by default.
  1334 
  1335 DOT_MULTI_TARGETS      = NO
  1336 
  1337 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
  1338 # generate a legend page explaining the meaning of the various boxes and 
  1339 # arrows in the dot generated graphs.
  1340 
  1341 GENERATE_LEGEND        = YES
  1342 
  1343 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
  1344 # remove the intermediate dot files that are used to generate 
  1345 # the various graphs.
  1346 
  1347 DOT_CLEANUP            = YES
  1348 
  1349 #---------------------------------------------------------------------------
  1350 # Configuration::additions related to the search engine   
  1351 #---------------------------------------------------------------------------
  1352 
  1353 # The SEARCHENGINE tag specifies whether or not a search engine should be 
  1354 # used. If set to NO the values of all tags below this one will be ignored.
  1355 
  1356 SEARCHENGINE           = NO