1.1 --- a/java/alt2xml-bin/nbproject/build-impl.xml Sat Jun 07 10:38:31 2014 +0200
1.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000
1.3 @@ -1,1042 +0,0 @@
1.4 -<?xml version="1.0" encoding="UTF-8"?>
1.5 -<!--
1.6 -*** GENERATED FROM project.xml - DO NOT EDIT ***
1.7 -*** EDIT ../build.xml INSTEAD ***
1.8 -
1.9 -For the purpose of easier reading the script
1.10 -is divided into following sections:
1.11 -
1.12 - - initialization
1.13 - - compilation
1.14 - - jar
1.15 - - execution
1.16 - - debugging
1.17 - - javadoc
1.18 - - junit compilation
1.19 - - junit execution
1.20 - - junit debugging
1.21 - - applet
1.22 - - cleanup
1.23 -
1.24 - -->
1.25 -<project xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3" xmlns:jaxrpc="http://www.netbeans.org/ns/j2se-project/jax-rpc" basedir=".." default="default" name="alt2xml-impl">
1.26 - <fail message="Please build using Ant 1.7.1 or higher.">
1.27 - <condition>
1.28 - <not>
1.29 - <antversion atleast="1.7.1"/>
1.30 - </not>
1.31 - </condition>
1.32 - </fail>
1.33 - <target depends="test,jar,javadoc" description="Build and test whole project." name="default"/>
1.34 - <!--
1.35 - ======================
1.36 - INITIALIZATION SECTION
1.37 - ======================
1.38 - -->
1.39 - <target name="-pre-init">
1.40 - <!-- Empty placeholder for easier customization. -->
1.41 - <!-- You can override this target in the ../build.xml file. -->
1.42 - </target>
1.43 - <target depends="-pre-init" name="-init-private">
1.44 - <property file="nbproject/private/config.properties"/>
1.45 - <property file="nbproject/private/configs/${config}.properties"/>
1.46 - <property file="nbproject/private/private.properties"/>
1.47 - </target>
1.48 - <target depends="-pre-init,-init-private" name="-init-user">
1.49 - <property file="${user.properties.file}"/>
1.50 - <!-- The two properties below are usually overridden -->
1.51 - <!-- by the active platform. Just a fallback. -->
1.52 - <property name="default.javac.source" value="1.4"/>
1.53 - <property name="default.javac.target" value="1.4"/>
1.54 - </target>
1.55 - <target depends="-pre-init,-init-private,-init-user" name="-init-project">
1.56 - <property file="nbproject/configs/${config}.properties"/>
1.57 - <property file="nbproject/project.properties"/>
1.58 - </target>
1.59 - <target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name="-do-init">
1.60 - <available file="${manifest.file}" property="manifest.available"/>
1.61 - <condition property="splashscreen.available">
1.62 - <and>
1.63 - <not>
1.64 - <equals arg1="${application.splash}" arg2="" trim="true"/>
1.65 - </not>
1.66 - <available file="${application.splash}"/>
1.67 - </and>
1.68 - </condition>
1.69 - <condition property="main.class.available">
1.70 - <and>
1.71 - <isset property="main.class"/>
1.72 - <not>
1.73 - <equals arg1="${main.class}" arg2="" trim="true"/>
1.74 - </not>
1.75 - </and>
1.76 - </condition>
1.77 - <condition property="manifest.available+main.class">
1.78 - <and>
1.79 - <isset property="manifest.available"/>
1.80 - <isset property="main.class.available"/>
1.81 - </and>
1.82 - </condition>
1.83 - <condition property="do.archive">
1.84 - <not>
1.85 - <istrue value="${jar.archive.disabled}"/>
1.86 - </not>
1.87 - </condition>
1.88 - <condition property="do.mkdist">
1.89 - <and>
1.90 - <isset property="do.archive"/>
1.91 - <isset property="libs.CopyLibs.classpath"/>
1.92 - <not>
1.93 - <istrue value="${mkdist.disabled}"/>
1.94 - </not>
1.95 - </and>
1.96 - </condition>
1.97 - <condition property="manifest.available+main.class+mkdist.available">
1.98 - <and>
1.99 - <istrue value="${manifest.available+main.class}"/>
1.100 - <isset property="do.mkdist"/>
1.101 - </and>
1.102 - </condition>
1.103 - <condition property="do.archive+manifest.available">
1.104 - <and>
1.105 - <isset property="manifest.available"/>
1.106 - <istrue value="${do.archive}"/>
1.107 - </and>
1.108 - </condition>
1.109 - <condition property="do.archive+main.class.available">
1.110 - <and>
1.111 - <isset property="main.class.available"/>
1.112 - <istrue value="${do.archive}"/>
1.113 - </and>
1.114 - </condition>
1.115 - <condition property="do.archive+splashscreen.available">
1.116 - <and>
1.117 - <isset property="splashscreen.available"/>
1.118 - <istrue value="${do.archive}"/>
1.119 - </and>
1.120 - </condition>
1.121 - <condition property="do.archive+manifest.available+main.class">
1.122 - <and>
1.123 - <istrue value="${manifest.available+main.class}"/>
1.124 - <istrue value="${do.archive}"/>
1.125 - </and>
1.126 - </condition>
1.127 - <condition property="manifest.available-mkdist.available">
1.128 - <or>
1.129 - <istrue value="${manifest.available}"/>
1.130 - <isset property="do.mkdist"/>
1.131 - </or>
1.132 - </condition>
1.133 - <condition property="manifest.available+main.class-mkdist.available">
1.134 - <or>
1.135 - <istrue value="${manifest.available+main.class}"/>
1.136 - <isset property="do.mkdist"/>
1.137 - </or>
1.138 - </condition>
1.139 - <condition property="have.tests">
1.140 - <or>
1.141 - <available file="${test.src.dir}"/>
1.142 - </or>
1.143 - </condition>
1.144 - <condition property="have.sources">
1.145 - <or>
1.146 - <available file="${src.dir}"/>
1.147 - </or>
1.148 - </condition>
1.149 - <condition property="netbeans.home+have.tests">
1.150 - <and>
1.151 - <isset property="netbeans.home"/>
1.152 - <isset property="have.tests"/>
1.153 - </and>
1.154 - </condition>
1.155 - <condition property="no.javadoc.preview">
1.156 - <and>
1.157 - <isset property="javadoc.preview"/>
1.158 - <isfalse value="${javadoc.preview}"/>
1.159 - </and>
1.160 - </condition>
1.161 - <property name="run.jvmargs" value=""/>
1.162 - <property name="javac.compilerargs" value=""/>
1.163 - <property name="work.dir" value="${basedir}"/>
1.164 - <condition property="no.deps">
1.165 - <and>
1.166 - <istrue value="${no.dependencies}"/>
1.167 - </and>
1.168 - </condition>
1.169 - <property name="javac.debug" value="true"/>
1.170 - <property name="javadoc.preview" value="true"/>
1.171 - <property name="application.args" value=""/>
1.172 - <property name="source.encoding" value="${file.encoding}"/>
1.173 - <property name="runtime.encoding" value="${source.encoding}"/>
1.174 - <condition property="javadoc.encoding.used" value="${javadoc.encoding}">
1.175 - <and>
1.176 - <isset property="javadoc.encoding"/>
1.177 - <not>
1.178 - <equals arg1="${javadoc.encoding}" arg2=""/>
1.179 - </not>
1.180 - </and>
1.181 - </condition>
1.182 - <property name="javadoc.encoding.used" value="${source.encoding}"/>
1.183 - <property name="includes" value="**"/>
1.184 - <property name="excludes" value=""/>
1.185 - <property name="do.depend" value="false"/>
1.186 - <condition property="do.depend.true">
1.187 - <istrue value="${do.depend}"/>
1.188 - </condition>
1.189 - <path id="endorsed.classpath.path" path="${endorsed.classpath}"/>
1.190 - <condition else="" property="endorsed.classpath.cmd.line.arg" value="-Xbootclasspath/p:'${toString:endorsed.classpath.path}'">
1.191 - <length length="0" string="${endorsed.classpath}" when="greater"/>
1.192 - </condition>
1.193 - <condition else="false" property="jdkBug6558476">
1.194 - <and>
1.195 - <matches pattern="1\.[56]" string="${java.specification.version}"/>
1.196 - <not>
1.197 - <os family="unix"/>
1.198 - </not>
1.199 - </and>
1.200 - </condition>
1.201 - <property name="javac.fork" value="${jdkBug6558476}"/>
1.202 - <property name="jar.index" value="false"/>
1.203 - <property name="jar.index.metainf" value="${jar.index}"/>
1.204 - <available file="${meta.inf.dir}/persistence.xml" property="has.persistence.xml"/>
1.205 - </target>
1.206 - <target name="-post-init">
1.207 - <!-- Empty placeholder for easier customization. -->
1.208 - <!-- You can override this target in the ../build.xml file. -->
1.209 - </target>
1.210 - <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init" name="-init-check">
1.211 - <fail unless="src.dir">Must set src.dir</fail>
1.212 - <fail unless="test.src.dir">Must set test.src.dir</fail>
1.213 - <fail unless="build.dir">Must set build.dir</fail>
1.214 - <fail unless="dist.dir">Must set dist.dir</fail>
1.215 - <fail unless="build.classes.dir">Must set build.classes.dir</fail>
1.216 - <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>
1.217 - <fail unless="build.test.classes.dir">Must set build.test.classes.dir</fail>
1.218 - <fail unless="build.test.results.dir">Must set build.test.results.dir</fail>
1.219 - <fail unless="build.classes.excludes">Must set build.classes.excludes</fail>
1.220 - <fail unless="dist.jar">Must set dist.jar</fail>
1.221 - </target>
1.222 - <target name="-init-macrodef-property">
1.223 - <macrodef name="property" uri="http://www.netbeans.org/ns/j2se-project/1">
1.224 - <attribute name="name"/>
1.225 - <attribute name="value"/>
1.226 - <sequential>
1.227 - <property name="@{name}" value="${@{value}}"/>
1.228 - </sequential>
1.229 - </macrodef>
1.230 - </target>
1.231 - <target depends="-init-ap-cmdline-properties" if="ap.supported.internal" name="-init-macrodef-javac-with-processors">
1.232 - <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3">
1.233 - <attribute default="${src.dir}" name="srcdir"/>
1.234 - <attribute default="${build.classes.dir}" name="destdir"/>
1.235 - <attribute default="${javac.classpath}" name="classpath"/>
1.236 - <attribute default="${javac.processorpath}" name="processorpath"/>
1.237 - <attribute default="${build.generated.sources.dir}/ap-source-output" name="apgeneratedsrcdir"/>
1.238 - <attribute default="${includes}" name="includes"/>
1.239 - <attribute default="${excludes}" name="excludes"/>
1.240 - <attribute default="${javac.debug}" name="debug"/>
1.241 - <attribute default="${empty.dir}" name="sourcepath"/>
1.242 - <attribute default="${empty.dir}" name="gensrcdir"/>
1.243 - <element name="customize" optional="true"/>
1.244 - <sequential>
1.245 - <property location="${build.dir}/empty" name="empty.dir"/>
1.246 - <mkdir dir="${empty.dir}"/>
1.247 - <mkdir dir="@{apgeneratedsrcdir}"/>
1.248 - <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}">
1.249 - <src>
1.250 - <dirset dir="@{gensrcdir}" erroronmissingdir="false">
1.251 - <include name="*"/>
1.252 - </dirset>
1.253 - </src>
1.254 - <classpath>
1.255 - <path path="@{classpath}"/>
1.256 - </classpath>
1.257 - <compilerarg line="${endorsed.classpath.cmd.line.arg}"/>
1.258 - <compilerarg line="${javac.compilerargs}"/>
1.259 - <compilerarg value="-processorpath"/>
1.260 - <compilerarg path="@{processorpath}:${empty.dir}"/>
1.261 - <compilerarg line="${ap.processors.internal}"/>
1.262 - <compilerarg line="${annotation.processing.processor.options}"/>
1.263 - <compilerarg value="-s"/>
1.264 - <compilerarg path="@{apgeneratedsrcdir}"/>
1.265 - <compilerarg line="${ap.proc.none.internal}"/>
1.266 - <customize/>
1.267 - </javac>
1.268 - </sequential>
1.269 - </macrodef>
1.270 - </target>
1.271 - <target depends="-init-ap-cmdline-properties" name="-init-macrodef-javac-without-processors" unless="ap.supported.internal">
1.272 - <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3">
1.273 - <attribute default="${src.dir}" name="srcdir"/>
1.274 - <attribute default="${build.classes.dir}" name="destdir"/>
1.275 - <attribute default="${javac.classpath}" name="classpath"/>
1.276 - <attribute default="${javac.processorpath}" name="processorpath"/>
1.277 - <attribute default="${build.generated.sources.dir}/ap-source-output" name="apgeneratedsrcdir"/>
1.278 - <attribute default="${includes}" name="includes"/>
1.279 - <attribute default="${excludes}" name="excludes"/>
1.280 - <attribute default="${javac.debug}" name="debug"/>
1.281 - <attribute default="${empty.dir}" name="sourcepath"/>
1.282 - <attribute default="${empty.dir}" name="gensrcdir"/>
1.283 - <element name="customize" optional="true"/>
1.284 - <sequential>
1.285 - <property location="${build.dir}/empty" name="empty.dir"/>
1.286 - <mkdir dir="${empty.dir}"/>
1.287 - <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}">
1.288 - <src>
1.289 - <dirset dir="@{gensrcdir}" erroronmissingdir="false">
1.290 - <include name="*"/>
1.291 - </dirset>
1.292 - </src>
1.293 - <classpath>
1.294 - <path path="@{classpath}"/>
1.295 - </classpath>
1.296 - <compilerarg line="${endorsed.classpath.cmd.line.arg}"/>
1.297 - <compilerarg line="${javac.compilerargs}"/>
1.298 - <customize/>
1.299 - </javac>
1.300 - </sequential>
1.301 - </macrodef>
1.302 - </target>
1.303 - <target depends="-init-macrodef-javac-with-processors,-init-macrodef-javac-without-processors" name="-init-macrodef-javac">
1.304 - <macrodef name="depend" uri="http://www.netbeans.org/ns/j2se-project/3">
1.305 - <attribute default="${src.dir}" name="srcdir"/>
1.306 - <attribute default="${build.classes.dir}" name="destdir"/>
1.307 - <attribute default="${javac.classpath}" name="classpath"/>
1.308 - <sequential>
1.309 - <depend cache="${build.dir}/depcache" destdir="@{destdir}" excludes="${excludes}" includes="${includes}" srcdir="@{srcdir}">
1.310 - <classpath>
1.311 - <path path="@{classpath}"/>
1.312 - </classpath>
1.313 - </depend>
1.314 - </sequential>
1.315 - </macrodef>
1.316 - <macrodef name="force-recompile" uri="http://www.netbeans.org/ns/j2se-project/3">
1.317 - <attribute default="${build.classes.dir}" name="destdir"/>
1.318 - <sequential>
1.319 - <fail unless="javac.includes">Must set javac.includes</fail>
1.320 - <pathconvert pathsep="${line.separator}" property="javac.includes.binary">
1.321 - <path>
1.322 - <filelist dir="@{destdir}" files="${javac.includes}"/>
1.323 - </path>
1.324 - <globmapper from="*.java" to="*.class"/>
1.325 - </pathconvert>
1.326 - <tempfile deleteonexit="true" property="javac.includesfile.binary"/>
1.327 - <echo file="${javac.includesfile.binary}" message="${javac.includes.binary}"/>
1.328 - <delete>
1.329 - <files includesfile="${javac.includesfile.binary}"/>
1.330 - </delete>
1.331 - <delete>
1.332 - <fileset file="${javac.includesfile.binary}"/>
1.333 - </delete>
1.334 - </sequential>
1.335 - </macrodef>
1.336 - </target>
1.337 - <target name="-init-macrodef-junit">
1.338 - <macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-project/3">
1.339 - <attribute default="${includes}" name="includes"/>
1.340 - <attribute default="${excludes}" name="excludes"/>
1.341 - <attribute default="**" name="testincludes"/>
1.342 - <sequential>
1.343 - <property name="junit.forkmode" value="perTest"/>
1.344 - <junit dir="${work.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" forkmode="${junit.forkmode}" showoutput="true" tempdir="${build.dir}">
1.345 - <batchtest todir="${build.test.results.dir}">
1.346 - <fileset dir="${test.src.dir}" excludes="@{excludes},${excludes}" includes="@{includes}">
1.347 - <filename name="@{testincludes}"/>
1.348 - </fileset>
1.349 - </batchtest>
1.350 - <classpath>
1.351 - <path path="${run.test.classpath}"/>
1.352 - </classpath>
1.353 - <syspropertyset>
1.354 - <propertyref prefix="test-sys-prop."/>
1.355 - <mapper from="test-sys-prop.*" to="*" type="glob"/>
1.356 - </syspropertyset>
1.357 - <formatter type="brief" usefile="false"/>
1.358 - <formatter type="xml"/>
1.359 - <jvmarg line="${endorsed.classpath.cmd.line.arg}"/>
1.360 - <jvmarg value="-ea"/>
1.361 - <jvmarg line="${run.jvmargs}"/>
1.362 - </junit>
1.363 - </sequential>
1.364 - </macrodef>
1.365 - </target>
1.366 - <target depends="-profile-pre-init, init, -profile-post-init, -profile-init-macrodef-profile, -profile-init-check" name="profile-init"/>
1.367 - <target name="-profile-pre-init">
1.368 - <!-- Empty placeholder for easier customization. -->
1.369 - <!-- You can override this target in the ../build.xml file. -->
1.370 - </target>
1.371 - <target name="-profile-post-init">
1.372 - <!-- Empty placeholder for easier customization. -->
1.373 - <!-- You can override this target in the ../build.xml file. -->
1.374 - </target>
1.375 - <target name="-profile-init-macrodef-profile">
1.376 - <macrodef name="resolve">
1.377 - <attribute name="name"/>
1.378 - <attribute name="value"/>
1.379 - <sequential>
1.380 - <property name="@{name}" value="${env.@{value}}"/>
1.381 - </sequential>
1.382 - </macrodef>
1.383 - <macrodef name="profile">
1.384 - <attribute default="${main.class}" name="classname"/>
1.385 - <element name="customize" optional="true"/>
1.386 - <sequential>
1.387 - <property environment="env"/>
1.388 - <resolve name="profiler.current.path" value="${profiler.info.pathvar}"/>
1.389 - <java classname="@{classname}" dir="${profiler.info.dir}" fork="true" jvm="${profiler.info.jvm}">
1.390 - <jvmarg value="${profiler.info.jvmargs.agent}"/>
1.391 - <jvmarg line="${profiler.info.jvmargs}"/>
1.392 - <env key="${profiler.info.pathvar}" path="${profiler.info.agentpath}:${profiler.current.path}"/>
1.393 - <arg line="${application.args}"/>
1.394 - <classpath>
1.395 - <path path="${run.classpath}"/>
1.396 - </classpath>
1.397 - <syspropertyset>
1.398 - <propertyref prefix="run-sys-prop."/>
1.399 - <mapper from="run-sys-prop.*" to="*" type="glob"/>
1.400 - </syspropertyset>
1.401 - <customize/>
1.402 - </java>
1.403 - </sequential>
1.404 - </macrodef>
1.405 - </target>
1.406 - <target depends="-profile-pre-init, init, -profile-post-init, -profile-init-macrodef-profile" name="-profile-init-check">
1.407 - <fail unless="profiler.info.jvm">Must set JVM to use for profiling in profiler.info.jvm</fail>
1.408 - <fail unless="profiler.info.jvmargs.agent">Must set profiler agent JVM arguments in profiler.info.jvmargs.agent</fail>
1.409 - </target>
1.410 - <target depends="-init-debug-args" name="-init-macrodef-nbjpda">
1.411 - <macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/j2se-project/1">
1.412 - <attribute default="${main.class}" name="name"/>
1.413 - <attribute default="${debug.classpath}" name="classpath"/>
1.414 - <attribute default="" name="stopclassname"/>
1.415 - <sequential>
1.416 - <nbjpdastart addressproperty="jpda.address" name="@{name}" stopclassname="@{stopclassname}" transport="${debug-transport}">
1.417 - <classpath>
1.418 - <path path="@{classpath}"/>
1.419 - </classpath>
1.420 - </nbjpdastart>
1.421 - </sequential>
1.422 - </macrodef>
1.423 - <macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/j2se-project/1">
1.424 - <attribute default="${build.classes.dir}" name="dir"/>
1.425 - <sequential>
1.426 - <nbjpdareload>
1.427 - <fileset dir="@{dir}" includes="${fix.classes}">
1.428 - <include name="${fix.includes}*.class"/>
1.429 - </fileset>
1.430 - </nbjpdareload>
1.431 - </sequential>
1.432 - </macrodef>
1.433 - </target>
1.434 - <target name="-init-debug-args">
1.435 - <property name="version-output" value="java version "${ant.java.version}"/>
1.436 - <condition property="have-jdk-older-than-1.4">
1.437 - <or>
1.438 - <contains string="${version-output}" substring="java version "1.0"/>
1.439 - <contains string="${version-output}" substring="java version "1.1"/>
1.440 - <contains string="${version-output}" substring="java version "1.2"/>
1.441 - <contains string="${version-output}" substring="java version "1.3"/>
1.442 - </or>
1.443 - </condition>
1.444 - <condition else="-Xdebug" property="debug-args-line" value="-Xdebug -Xnoagent -Djava.compiler=none">
1.445 - <istrue value="${have-jdk-older-than-1.4}"/>
1.446 - </condition>
1.447 - <condition else="dt_socket" property="debug-transport-by-os" value="dt_shmem">
1.448 - <os family="windows"/>
1.449 - </condition>
1.450 - <condition else="${debug-transport-by-os}" property="debug-transport" value="${debug.transport}">
1.451 - <isset property="debug.transport"/>
1.452 - </condition>
1.453 - </target>
1.454 - <target depends="-init-debug-args" name="-init-macrodef-debug">
1.455 - <macrodef name="debug" uri="http://www.netbeans.org/ns/j2se-project/3">
1.456 - <attribute default="${main.class}" name="classname"/>
1.457 - <attribute default="${debug.classpath}" name="classpath"/>
1.458 - <element name="customize" optional="true"/>
1.459 - <sequential>
1.460 - <java classname="@{classname}" dir="${work.dir}" fork="true">
1.461 - <jvmarg line="${endorsed.classpath.cmd.line.arg}"/>
1.462 - <jvmarg line="${debug-args-line}"/>
1.463 - <jvmarg value="-Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/>
1.464 - <jvmarg value="-Dfile.encoding=${runtime.encoding}"/>
1.465 - <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/>
1.466 - <jvmarg line="${run.jvmargs}"/>
1.467 - <classpath>
1.468 - <path path="@{classpath}"/>
1.469 - </classpath>
1.470 - <syspropertyset>
1.471 - <propertyref prefix="run-sys-prop."/>
1.472 - <mapper from="run-sys-prop.*" to="*" type="glob"/>
1.473 - </syspropertyset>
1.474 - <customize/>
1.475 - </java>
1.476 - </sequential>
1.477 - </macrodef>
1.478 - </target>
1.479 - <target name="-init-macrodef-java">
1.480 - <macrodef name="java" uri="http://www.netbeans.org/ns/j2se-project/1">
1.481 - <attribute default="${main.class}" name="classname"/>
1.482 - <attribute default="${run.classpath}" name="classpath"/>
1.483 - <element name="customize" optional="true"/>
1.484 - <sequential>
1.485 - <java classname="@{classname}" dir="${work.dir}" fork="true">
1.486 - <jvmarg line="${endorsed.classpath.cmd.line.arg}"/>
1.487 - <jvmarg value="-Dfile.encoding=${runtime.encoding}"/>
1.488 - <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/>
1.489 - <jvmarg line="${run.jvmargs}"/>
1.490 - <classpath>
1.491 - <path path="@{classpath}"/>
1.492 - </classpath>
1.493 - <syspropertyset>
1.494 - <propertyref prefix="run-sys-prop."/>
1.495 - <mapper from="run-sys-prop.*" to="*" type="glob"/>
1.496 - </syspropertyset>
1.497 - <customize/>
1.498 - </java>
1.499 - </sequential>
1.500 - </macrodef>
1.501 - </target>
1.502 - <target name="-init-macrodef-copylibs">
1.503 - <macrodef name="copylibs" uri="http://www.netbeans.org/ns/j2se-project/3">
1.504 - <attribute default="${manifest.file}" name="manifest"/>
1.505 - <element name="customize" optional="true"/>
1.506 - <sequential>
1.507 - <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>
1.508 - <pathconvert property="run.classpath.without.build.classes.dir">
1.509 - <path path="${run.classpath}"/>
1.510 - <map from="${build.classes.dir.resolved}" to=""/>
1.511 - </pathconvert>
1.512 - <pathconvert pathsep=" " property="jar.classpath">
1.513 - <path path="${run.classpath.without.build.classes.dir}"/>
1.514 - <chainedmapper>
1.515 - <flattenmapper/>
1.516 - <globmapper from="*" to="lib/*"/>
1.517 - </chainedmapper>
1.518 - </pathconvert>
1.519 - <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/>
1.520 - <copylibs compress="${jar.compress}" index="${jar.index}" indexMetaInf="${jar.index.metainf}" jarfile="${dist.jar}" manifest="@{manifest}" runtimeclasspath="${run.classpath.without.build.classes.dir}">
1.521 - <fileset dir="${build.classes.dir}"/>
1.522 - <manifest>
1.523 - <attribute name="Class-Path" value="${jar.classpath}"/>
1.524 - <customize/>
1.525 - </manifest>
1.526 - </copylibs>
1.527 - </sequential>
1.528 - </macrodef>
1.529 - </target>
1.530 - <target name="-init-presetdef-jar">
1.531 - <presetdef name="jar" uri="http://www.netbeans.org/ns/j2se-project/1">
1.532 - <jar compress="${jar.compress}" index="${jar.index}" jarfile="${dist.jar}">
1.533 - <j2seproject1:fileset dir="${build.classes.dir}"/>
1.534 - </jar>
1.535 - </presetdef>
1.536 - </target>
1.537 - <target name="-init-ap-cmdline-properties">
1.538 - <property name="annotation.processing.enabled" value="true"/>
1.539 - <property name="annotation.processing.processors.list" value=""/>
1.540 - <property name="annotation.processing.processor.options" value=""/>
1.541 - <property name="annotation.processing.run.all.processors" value="true"/>
1.542 - <property name="javac.processorpath" value="${javac.classpath}"/>
1.543 - <property name="javac.test.processorpath" value="${javac.test.classpath}"/>
1.544 - <condition property="ap.supported.internal" value="true">
1.545 - <not>
1.546 - <matches pattern="1\.[0-5](\..*)?" string="${javac.source}"/>
1.547 - </not>
1.548 - </condition>
1.549 - </target>
1.550 - <target depends="-init-ap-cmdline-properties" if="ap.supported.internal" name="-init-ap-cmdline-supported">
1.551 - <condition else="" property="ap.processors.internal" value="-processor ${annotation.processing.processors.list}">
1.552 - <isfalse value="${annotation.processing.run.all.processors}"/>
1.553 - </condition>
1.554 - <condition else="" property="ap.proc.none.internal" value="-proc:none">
1.555 - <isfalse value="${annotation.processing.enabled}"/>
1.556 - </condition>
1.557 - </target>
1.558 - <target depends="-init-ap-cmdline-properties,-init-ap-cmdline-supported" name="-init-ap-cmdline">
1.559 - <property name="ap.cmd.line.internal" value=""/>
1.560 - </target>
1.561 - <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar,-init-ap-cmdline" name="init"/>
1.562 - <!--
1.563 - ===================
1.564 - COMPILATION SECTION
1.565 - ===================
1.566 - -->
1.567 - <target name="-deps-jar-init" unless="built-jar.properties">
1.568 - <property location="${build.dir}/built-jar.properties" name="built-jar.properties"/>
1.569 - <delete file="${built-jar.properties}" quiet="true"/>
1.570 - </target>
1.571 - <target if="already.built.jar.${basedir}" name="-warn-already-built-jar">
1.572 - <echo level="warn" message="Cycle detected: alt2xml was already built"/>
1.573 - </target>
1.574 - <target depends="init,-deps-jar-init" name="deps-jar" unless="no.deps">
1.575 - <mkdir dir="${build.dir}"/>
1.576 - <touch file="${built-jar.properties}" verbose="false"/>
1.577 - <property file="${built-jar.properties}" prefix="already.built.jar."/>
1.578 - <antcall target="-warn-already-built-jar"/>
1.579 - <propertyfile file="${built-jar.properties}">
1.580 - <entry key="${basedir}" value=""/>
1.581 - </propertyfile>
1.582 - </target>
1.583 - <target depends="init,-check-automatic-build,-clean-after-automatic-build" name="-verify-automatic-build"/>
1.584 - <target depends="init" name="-check-automatic-build">
1.585 - <available file="${build.classes.dir}/.netbeans_automatic_build" property="netbeans.automatic.build"/>
1.586 - </target>
1.587 - <target depends="init" if="netbeans.automatic.build" name="-clean-after-automatic-build">
1.588 - <antcall target="clean"/>
1.589 - </target>
1.590 - <target depends="init,deps-jar" name="-pre-pre-compile">
1.591 - <mkdir dir="${build.classes.dir}"/>
1.592 - </target>
1.593 - <target name="-pre-compile">
1.594 - <!-- Empty placeholder for easier customization. -->
1.595 - <!-- You can override this target in the ../build.xml file. -->
1.596 - </target>
1.597 - <target if="do.depend.true" name="-compile-depend">
1.598 - <pathconvert property="build.generated.subdirs">
1.599 - <dirset dir="${build.generated.sources.dir}" erroronmissingdir="false">
1.600 - <include name="*"/>
1.601 - </dirset>
1.602 - </pathconvert>
1.603 - <j2seproject3:depend srcdir="${src.dir}:${build.generated.subdirs}"/>
1.604 - </target>
1.605 - <target depends="init,deps-jar,-pre-pre-compile,-pre-compile, -copy-persistence-xml,-compile-depend" if="have.sources" name="-do-compile">
1.606 - <j2seproject3:javac gensrcdir="${build.generated.sources.dir}"/>
1.607 - <copy todir="${build.classes.dir}">
1.608 - <fileset dir="${src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>
1.609 - </copy>
1.610 - </target>
1.611 - <target if="has.persistence.xml" name="-copy-persistence-xml">
1.612 - <mkdir dir="${build.classes.dir}/META-INF"/>
1.613 - <copy todir="${build.classes.dir}/META-INF">
1.614 - <fileset dir="${meta.inf.dir}" includes="persistence.xml"/>
1.615 - </copy>
1.616 - </target>
1.617 - <target name="-post-compile">
1.618 - <!-- Empty placeholder for easier customization. -->
1.619 - <!-- You can override this target in the ../build.xml file. -->
1.620 - </target>
1.621 - <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project." name="compile"/>
1.622 - <target name="-pre-compile-single">
1.623 - <!-- Empty placeholder for easier customization. -->
1.624 - <!-- You can override this target in the ../build.xml file. -->
1.625 - </target>
1.626 - <target depends="init,deps-jar,-pre-pre-compile" name="-do-compile-single">
1.627 - <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
1.628 - <j2seproject3:force-recompile/>
1.629 - <j2seproject3:javac excludes="" gensrcdir="${build.generated.sources.dir}" includes="${javac.includes}" sourcepath="${src.dir}"/>
1.630 - </target>
1.631 - <target name="-post-compile-single">
1.632 - <!-- Empty placeholder for easier customization. -->
1.633 - <!-- You can override this target in the ../build.xml file. -->
1.634 - </target>
1.635 - <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name="compile-single"/>
1.636 - <!--
1.637 - ====================
1.638 - JAR BUILDING SECTION
1.639 - ====================
1.640 - -->
1.641 - <target depends="init" name="-pre-pre-jar">
1.642 - <dirname file="${dist.jar}" property="dist.jar.dir"/>
1.643 - <mkdir dir="${dist.jar.dir}"/>
1.644 - </target>
1.645 - <target name="-pre-jar">
1.646 - <!-- Empty placeholder for easier customization. -->
1.647 - <!-- You can override this target in the ../build.xml file. -->
1.648 - </target>
1.649 - <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive" name="-do-jar-without-manifest" unless="manifest.available-mkdist.available">
1.650 - <j2seproject1:jar/>
1.651 - </target>
1.652 - <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive+manifest.available" name="-do-jar-with-manifest" unless="manifest.available+main.class-mkdist.available">
1.653 - <j2seproject1:jar manifest="${manifest.file}"/>
1.654 - </target>
1.655 - <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive+manifest.available+main.class" name="-do-jar-with-mainclass" unless="manifest.available+main.class+mkdist.available">
1.656 - <j2seproject1:jar manifest="${manifest.file}">
1.657 - <j2seproject1:manifest>
1.658 - <j2seproject1:attribute name="Main-Class" value="${main.class}"/>
1.659 - </j2seproject1:manifest>
1.660 - </j2seproject1:jar>
1.661 - <echo level="info">To run this application from the command line without Ant, try:</echo>
1.662 - <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>
1.663 - <property location="${dist.jar}" name="dist.jar.resolved"/>
1.664 - <pathconvert property="run.classpath.with.dist.jar">
1.665 - <path path="${run.classpath}"/>
1.666 - <map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/>
1.667 - </pathconvert>
1.668 - <echo level="info">java -cp "${run.classpath.with.dist.jar}" ${main.class}</echo>
1.669 - </target>
1.670 - <target depends="init" if="do.archive" name="-do-jar-with-libraries-create-manifest" unless="manifest.available">
1.671 - <tempfile deleteonexit="true" destdir="${build.dir}" property="tmp.manifest.file"/>
1.672 - <touch file="${tmp.manifest.file}" verbose="false"/>
1.673 - </target>
1.674 - <target depends="init" if="do.archive+manifest.available" name="-do-jar-with-libraries-copy-manifest">
1.675 - <tempfile deleteonexit="true" destdir="${build.dir}" property="tmp.manifest.file"/>
1.676 - <copy file="${manifest.file}" tofile="${tmp.manifest.file}"/>
1.677 - </target>
1.678 - <target depends="init,-do-jar-with-libraries-create-manifest,-do-jar-with-libraries-copy-manifest" if="do.archive+main.class.available" name="-do-jar-with-libraries-set-main">
1.679 - <manifest file="${tmp.manifest.file}" mode="update">
1.680 - <attribute name="Main-Class" value="${main.class}"/>
1.681 - </manifest>
1.682 - </target>
1.683 - <target depends="init,-do-jar-with-libraries-create-manifest,-do-jar-with-libraries-copy-manifest" if="do.archive+splashscreen.available" name="-do-jar-with-libraries-set-splashscreen">
1.684 - <basename file="${application.splash}" property="splashscreen.basename"/>
1.685 - <mkdir dir="${build.classes.dir}/META-INF"/>
1.686 - <copy failonerror="false" file="${application.splash}" todir="${build.classes.dir}/META-INF"/>
1.687 - <manifest file="${tmp.manifest.file}" mode="update">
1.688 - <attribute name="SplashScreen-Image" value="META-INF/${splashscreen.basename}"/>
1.689 - </manifest>
1.690 - </target>
1.691 - <target depends="init,-init-macrodef-copylibs,compile,-pre-pre-jar,-pre-jar,-do-jar-with-libraries-create-manifest,-do-jar-with-libraries-copy-manifest,-do-jar-with-libraries-set-main,-do-jar-with-libraries-set-splashscreen" if="do.mkdist" name="-do-jar-with-libraries-pack">
1.692 - <j2seproject3:copylibs manifest="${tmp.manifest.file}"/>
1.693 - <echo level="info">To run this application from the command line without Ant, try:</echo>
1.694 - <property location="${dist.jar}" name="dist.jar.resolved"/>
1.695 - <echo level="info">java -jar "${dist.jar.resolved}"</echo>
1.696 - </target>
1.697 - <target depends="-do-jar-with-libraries-pack" if="do.archive" name="-do-jar-with-libraries-delete-manifest">
1.698 - <delete>
1.699 - <fileset file="${tmp.manifest.file}"/>
1.700 - </delete>
1.701 - </target>
1.702 - <target depends="init,compile,-pre-pre-jar,-pre-jar,-do-jar-with-libraries-create-manifest,-do-jar-with-libraries-copy-manifest,-do-jar-with-libraries-set-main,-do-jar-with-libraries-set-splashscreen,-do-jar-with-libraries-pack,-do-jar-with-libraries-delete-manifest" name="-do-jar-with-libraries"/>
1.703 - <target name="-post-jar">
1.704 - <!-- Empty placeholder for easier customization. -->
1.705 - <!-- You can override this target in the ../build.xml file. -->
1.706 - </target>
1.707 - <target depends="init,compile,-pre-jar,-do-jar-with-manifest,-do-jar-without-manifest,-do-jar-with-mainclass,-do-jar-with-libraries,-post-jar" description="Build JAR." name="jar"/>
1.708 - <!--
1.709 - =================
1.710 - EXECUTION SECTION
1.711 - =================
1.712 - -->
1.713 - <target depends="init,compile" description="Run a main class." name="run">
1.714 - <j2seproject1:java>
1.715 - <customize>
1.716 - <arg line="${application.args}"/>
1.717 - </customize>
1.718 - </j2seproject1:java>
1.719 - </target>
1.720 - <target name="-do-not-recompile">
1.721 - <property name="javac.includes.binary" value=""/>
1.722 - </target>
1.723 - <target depends="init,compile-single" name="run-single">
1.724 - <fail unless="run.class">Must select one file in the IDE or set run.class</fail>
1.725 - <j2seproject1:java classname="${run.class}"/>
1.726 - </target>
1.727 - <target depends="init,compile-test-single" name="run-test-with-main">
1.728 - <fail unless="run.class">Must select one file in the IDE or set run.class</fail>
1.729 - <j2seproject1:java classname="${run.class}" classpath="${run.test.classpath}"/>
1.730 - </target>
1.731 - <!--
1.732 - =================
1.733 - DEBUGGING SECTION
1.734 - =================
1.735 - -->
1.736 - <target depends="init" if="netbeans.home" name="-debug-start-debugger">
1.737 - <j2seproject1:nbjpdastart name="${debug.class}"/>
1.738 - </target>
1.739 - <target depends="init" if="netbeans.home" name="-debug-start-debugger-main-test">
1.740 - <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${debug.class}"/>
1.741 - </target>
1.742 - <target depends="init,compile" name="-debug-start-debuggee">
1.743 - <j2seproject3:debug>
1.744 - <customize>
1.745 - <arg line="${application.args}"/>
1.746 - </customize>
1.747 - </j2seproject3:debug>
1.748 - </target>
1.749 - <target depends="init,compile,-debug-start-debugger,-debug-start-debuggee" description="Debug project in IDE." if="netbeans.home" name="debug"/>
1.750 - <target depends="init" if="netbeans.home" name="-debug-start-debugger-stepinto">
1.751 - <j2seproject1:nbjpdastart stopclassname="${main.class}"/>
1.752 - </target>
1.753 - <target depends="init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee" if="netbeans.home" name="debug-stepinto"/>
1.754 - <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-single">
1.755 - <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>
1.756 - <j2seproject3:debug classname="${debug.class}"/>
1.757 - </target>
1.758 - <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if="netbeans.home" name="debug-single"/>
1.759 - <target depends="init,compile-test-single" if="netbeans.home" name="-debug-start-debuggee-main-test">
1.760 - <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>
1.761 - <j2seproject3:debug classname="${debug.class}" classpath="${debug.test.classpath}"/>
1.762 - </target>
1.763 - <target depends="init,compile-test-single,-debug-start-debugger-main-test,-debug-start-debuggee-main-test" if="netbeans.home" name="debug-test-with-main"/>
1.764 - <target depends="init" name="-pre-debug-fix">
1.765 - <fail unless="fix.includes">Must set fix.includes</fail>
1.766 - <property name="javac.includes" value="${fix.includes}.java"/>
1.767 - </target>
1.768 - <target depends="init,-pre-debug-fix,compile-single" if="netbeans.home" name="-do-debug-fix">
1.769 - <j2seproject1:nbjpdareload/>
1.770 - </target>
1.771 - <target depends="init,-pre-debug-fix,-do-debug-fix" if="netbeans.home" name="debug-fix"/>
1.772 - <!--
1.773 - =================
1.774 - PROFILING SECTION
1.775 - =================
1.776 - -->
1.777 - <target depends="profile-init,compile" description="Profile a project in the IDE." if="netbeans.home" name="profile">
1.778 - <nbprofiledirect>
1.779 - <classpath>
1.780 - <path path="${run.classpath}"/>
1.781 - </classpath>
1.782 - </nbprofiledirect>
1.783 - <profile/>
1.784 - </target>
1.785 - <target depends="profile-init,compile-single" description="Profile a selected class in the IDE." if="netbeans.home" name="profile-single">
1.786 - <fail unless="profile.class">Must select one file in the IDE or set profile.class</fail>
1.787 - <nbprofiledirect>
1.788 - <classpath>
1.789 - <path path="${run.classpath}"/>
1.790 - </classpath>
1.791 - </nbprofiledirect>
1.792 - <profile classname="${profile.class}"/>
1.793 - </target>
1.794 - <!--
1.795 - =========================
1.796 - APPLET PROFILING SECTION
1.797 - =========================
1.798 - -->
1.799 - <target depends="profile-init,compile-single" if="netbeans.home" name="profile-applet">
1.800 - <nbprofiledirect>
1.801 - <classpath>
1.802 - <path path="${run.classpath}"/>
1.803 - </classpath>
1.804 - </nbprofiledirect>
1.805 - <profile classname="sun.applet.AppletViewer">
1.806 - <customize>
1.807 - <arg value="${applet.url}"/>
1.808 - </customize>
1.809 - </profile>
1.810 - </target>
1.811 - <!--
1.812 - =========================
1.813 - TESTS PROFILING SECTION
1.814 - =========================
1.815 - -->
1.816 - <target depends="profile-init,compile-test-single" if="netbeans.home" name="profile-test-single">
1.817 - <nbprofiledirect>
1.818 - <classpath>
1.819 - <path path="${run.test.classpath}"/>
1.820 - </classpath>
1.821 - </nbprofiledirect>
1.822 - <junit dir="${profiler.info.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" jvm="${profiler.info.jvm}" showoutput="true">
1.823 - <env key="${profiler.info.pathvar}" path="${profiler.info.agentpath}:${profiler.current.path}"/>
1.824 - <jvmarg value="${profiler.info.jvmargs.agent}"/>
1.825 - <jvmarg line="${profiler.info.jvmargs}"/>
1.826 - <test name="${profile.class}"/>
1.827 - <classpath>
1.828 - <path path="${run.test.classpath}"/>
1.829 - </classpath>
1.830 - <syspropertyset>
1.831 - <propertyref prefix="test-sys-prop."/>
1.832 - <mapper from="test-sys-prop.*" to="*" type="glob"/>
1.833 - </syspropertyset>
1.834 - <formatter type="brief" usefile="false"/>
1.835 - <formatter type="xml"/>
1.836 - </junit>
1.837 - </target>
1.838 - <!--
1.839 - ===============
1.840 - JAVADOC SECTION
1.841 - ===============
1.842 - -->
1.843 - <target depends="init" if="have.sources" name="-javadoc-build">
1.844 - <mkdir dir="${dist.javadoc.dir}"/>
1.845 - <javadoc additionalparam="${javadoc.additionalparam}" author="${javadoc.author}" charset="UTF-8" destdir="${dist.javadoc.dir}" docencoding="UTF-8" encoding="${javadoc.encoding.used}" failonerror="true" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" notree="${javadoc.notree}" private="${javadoc.private}" source="${javac.source}" splitindex="${javadoc.splitindex}" use="${javadoc.use}" useexternalfile="true" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}">
1.846 - <classpath>
1.847 - <path path="${javac.classpath}"/>
1.848 - </classpath>
1.849 - <fileset dir="${src.dir}" excludes="*.java,${excludes}" includes="${includes}">
1.850 - <filename name="**/*.java"/>
1.851 - </fileset>
1.852 - <fileset dir="${build.generated.sources.dir}" erroronmissingdir="false">
1.853 - <include name="**/*.java"/>
1.854 - <exclude name="*.java"/>
1.855 - </fileset>
1.856 - </javadoc>
1.857 - <copy todir="${dist.javadoc.dir}">
1.858 - <fileset dir="${src.dir}" excludes="${excludes}" includes="${includes}">
1.859 - <filename name="**/doc-files/**"/>
1.860 - </fileset>
1.861 - <fileset dir="${build.generated.sources.dir}" erroronmissingdir="false">
1.862 - <include name="**/doc-files/**"/>
1.863 - </fileset>
1.864 - </copy>
1.865 - </target>
1.866 - <target depends="init,-javadoc-build" if="netbeans.home" name="-javadoc-browse" unless="no.javadoc.preview">
1.867 - <nbbrowse file="${dist.javadoc.dir}/index.html"/>
1.868 - </target>
1.869 - <target depends="init,-javadoc-build,-javadoc-browse" description="Build Javadoc." name="javadoc"/>
1.870 - <!--
1.871 - =========================
1.872 - JUNIT COMPILATION SECTION
1.873 - =========================
1.874 - -->
1.875 - <target depends="init,compile" if="have.tests" name="-pre-pre-compile-test">
1.876 - <mkdir dir="${build.test.classes.dir}"/>
1.877 - </target>
1.878 - <target name="-pre-compile-test">
1.879 - <!-- Empty placeholder for easier customization. -->
1.880 - <!-- You can override this target in the ../build.xml file. -->
1.881 - </target>
1.882 - <target if="do.depend.true" name="-compile-test-depend">
1.883 - <j2seproject3:depend classpath="${javac.test.classpath}" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/>
1.884 - </target>
1.885 - <target depends="init,deps-jar,compile,-pre-pre-compile-test,-pre-compile-test,-compile-test-depend" if="have.tests" name="-do-compile-test">
1.886 - <j2seproject3:javac apgeneratedsrcdir="${build.test.classes.dir}" classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" processorpath="${javac.test.processorpath}" srcdir="${test.src.dir}"/>
1.887 - <copy todir="${build.test.classes.dir}">
1.888 - <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>
1.889 - </copy>
1.890 - </target>
1.891 - <target name="-post-compile-test">
1.892 - <!-- Empty placeholder for easier customization. -->
1.893 - <!-- You can override this target in the ../build.xml file. -->
1.894 - </target>
1.895 - <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name="compile-test"/>
1.896 - <target name="-pre-compile-test-single">
1.897 - <!-- Empty placeholder for easier customization. -->
1.898 - <!-- You can override this target in the ../build.xml file. -->
1.899 - </target>
1.900 - <target depends="init,deps-jar,compile,-pre-pre-compile-test,-pre-compile-test-single" if="have.tests" name="-do-compile-test-single">
1.901 - <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
1.902 - <j2seproject3:force-recompile destdir="${build.test.classes.dir}"/>
1.903 - <j2seproject3:javac apgeneratedsrcdir="${build.test.classes.dir}" classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" excludes="" includes="${javac.includes}" processorpath="${javac.test.processorpath}" sourcepath="${test.src.dir}" srcdir="${test.src.dir}"/>
1.904 - <copy todir="${build.test.classes.dir}">
1.905 - <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>
1.906 - </copy>
1.907 - </target>
1.908 - <target name="-post-compile-test-single">
1.909 - <!-- Empty placeholder for easier customization. -->
1.910 - <!-- You can override this target in the ../build.xml file. -->
1.911 - </target>
1.912 - <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name="compile-test-single"/>
1.913 - <!--
1.914 - =======================
1.915 - JUNIT EXECUTION SECTION
1.916 - =======================
1.917 - -->
1.918 - <target depends="init" if="have.tests" name="-pre-test-run">
1.919 - <mkdir dir="${build.test.results.dir}"/>
1.920 - </target>
1.921 - <target depends="init,compile-test,-pre-test-run" if="have.tests" name="-do-test-run">
1.922 - <j2seproject3:junit testincludes="**/*Test.java"/>
1.923 - </target>
1.924 - <target depends="init,compile-test,-pre-test-run,-do-test-run" if="have.tests" name="-post-test-run">
1.925 - <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail>
1.926 - </target>
1.927 - <target depends="init" if="have.tests" name="test-report"/>
1.928 - <target depends="init" if="netbeans.home+have.tests" name="-test-browse"/>
1.929 - <target depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests." name="test"/>
1.930 - <target depends="init" if="have.tests" name="-pre-test-run-single">
1.931 - <mkdir dir="${build.test.results.dir}"/>
1.932 - </target>
1.933 - <target depends="init,compile-test-single,-pre-test-run-single" if="have.tests" name="-do-test-run-single">
1.934 - <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail>
1.935 - <j2seproject3:junit excludes="" includes="${test.includes}"/>
1.936 - </target>
1.937 - <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single" if="have.tests" name="-post-test-run-single">
1.938 - <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail>
1.939 - </target>
1.940 - <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test." name="test-single"/>
1.941 - <!--
1.942 - =======================
1.943 - JUNIT DEBUGGING SECTION
1.944 - =======================
1.945 - -->
1.946 - <target depends="init,compile-test" if="have.tests" name="-debug-start-debuggee-test">
1.947 - <fail unless="test.class">Must select one file in the IDE or set test.class</fail>
1.948 - <property location="${build.test.results.dir}/TEST-${test.class}.xml" name="test.report.file"/>
1.949 - <delete file="${test.report.file}"/>
1.950 - <mkdir dir="${build.test.results.dir}"/>
1.951 - <j2seproject3:debug classname="org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner" classpath="${ant.home}/lib/ant.jar:${ant.home}/lib/ant-junit.jar:${debug.test.classpath}">
1.952 - <customize>
1.953 - <syspropertyset>
1.954 - <propertyref prefix="test-sys-prop."/>
1.955 - <mapper from="test-sys-prop.*" to="*" type="glob"/>
1.956 - </syspropertyset>
1.957 - <arg value="${test.class}"/>
1.958 - <arg value="showoutput=true"/>
1.959 - <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter"/>
1.960 - <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}"/>
1.961 - </customize>
1.962 - </j2seproject3:debug>
1.963 - </target>
1.964 - <target depends="init,compile-test" if="netbeans.home+have.tests" name="-debug-start-debugger-test">
1.965 - <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${test.class}"/>
1.966 - </target>
1.967 - <target depends="init,compile-test-single,-debug-start-debugger-test,-debug-start-debuggee-test" name="debug-test"/>
1.968 - <target depends="init,-pre-debug-fix,compile-test-single" if="netbeans.home" name="-do-debug-fix-test">
1.969 - <j2seproject1:nbjpdareload dir="${build.test.classes.dir}"/>
1.970 - </target>
1.971 - <target depends="init,-pre-debug-fix,-do-debug-fix-test" if="netbeans.home" name="debug-fix-test"/>
1.972 - <!--
1.973 - =========================
1.974 - APPLET EXECUTION SECTION
1.975 - =========================
1.976 - -->
1.977 - <target depends="init,compile-single" name="run-applet">
1.978 - <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>
1.979 - <j2seproject1:java classname="sun.applet.AppletViewer">
1.980 - <customize>
1.981 - <arg value="${applet.url}"/>
1.982 - </customize>
1.983 - </j2seproject1:java>
1.984 - </target>
1.985 - <!--
1.986 - =========================
1.987 - APPLET DEBUGGING SECTION
1.988 - =========================
1.989 - -->
1.990 - <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-applet">
1.991 - <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>
1.992 - <j2seproject3:debug classname="sun.applet.AppletViewer">
1.993 - <customize>
1.994 - <arg value="${applet.url}"/>
1.995 - </customize>
1.996 - </j2seproject3:debug>
1.997 - </target>
1.998 - <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-applet" if="netbeans.home" name="debug-applet"/>
1.999 - <!--
1.1000 - ===============
1.1001 - CLEANUP SECTION
1.1002 - ===============
1.1003 - -->
1.1004 - <target name="-deps-clean-init" unless="built-clean.properties">
1.1005 - <property location="${build.dir}/built-clean.properties" name="built-clean.properties"/>
1.1006 - <delete file="${built-clean.properties}" quiet="true"/>
1.1007 - </target>
1.1008 - <target if="already.built.clean.${basedir}" name="-warn-already-built-clean">
1.1009 - <echo level="warn" message="Cycle detected: alt2xml was already built"/>
1.1010 - </target>
1.1011 - <target depends="init,-deps-clean-init" name="deps-clean" unless="no.deps">
1.1012 - <mkdir dir="${build.dir}"/>
1.1013 - <touch file="${built-clean.properties}" verbose="false"/>
1.1014 - <property file="${built-clean.properties}" prefix="already.built.clean."/>
1.1015 - <antcall target="-warn-already-built-clean"/>
1.1016 - <propertyfile file="${built-clean.properties}">
1.1017 - <entry key="${basedir}" value=""/>
1.1018 - </propertyfile>
1.1019 - </target>
1.1020 - <target depends="init" name="-do-clean">
1.1021 - <delete dir="${build.dir}"/>
1.1022 - <delete dir="${dist.dir}" followsymlinks="false" includeemptydirs="true"/>
1.1023 - </target>
1.1024 - <target name="-post-clean">
1.1025 - <!-- Empty placeholder for easier customization. -->
1.1026 - <!-- You can override this target in the ../build.xml file. -->
1.1027 - </target>
1.1028 - <target depends="init,deps-clean,-do-clean,-post-clean" description="Clean build products." name="clean"/>
1.1029 - <target name="-check-call-dep">
1.1030 - <property file="${call.built.properties}" prefix="already.built."/>
1.1031 - <condition property="should.call.dep">
1.1032 - <not>
1.1033 - <isset property="already.built.${call.subproject}"/>
1.1034 - </not>
1.1035 - </condition>
1.1036 - </target>
1.1037 - <target depends="-check-call-dep" if="should.call.dep" name="-maybe-call-dep">
1.1038 - <ant antfile="${call.script}" inheritall="false" target="${call.target}">
1.1039 - <propertyset>
1.1040 - <propertyref prefix="transfer."/>
1.1041 - <mapper from="transfer.*" to="*" type="glob"/>
1.1042 - </propertyset>
1.1043 - </ant>
1.1044 - </target>
1.1045 -</project>