/**

  * LPT signal generator

  * Copyright © 2017 František Kučera (frantovo.cz)

  *

  * This program is free software: you can redistribute it and/or modify

  * it under the terms of the GNU General Public License as published by

  * the Free Software Foundation, either version 3 of the License, or

  * (at your option) any later version.

  *

  * This program is distributed in the hope that it will be useful,

  * but WITHOUT ANY WARRANTY; without even the implied warranty of

  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

  * GNU General Public License for more details.

  *

  * You should have received a copy of the GNU General Public License

  * along with this program. If not, see <http://www.gnu.org/licenses/>.

  */

 #include <stdlib.h>

 #include <iostream>

 #include <stdio.h>

 #include <math.h>

 #include <sys/io.h>

 #include <unistd.h>

 #include <chrono> // requires -std=c++11

 /**

  * can not mix printf and wprintf

  * see https://stackoverflow.com/questions/8681623/printf-and-wprintf-in-single-c-code

  * > This is to be expected; your code is invoking undefined behavior.

  * > Per the C standard, each FILE stream has associated with it an "orientation" (either "byte" or "wide)

  * > which is set by the first operation performed on it, and which can be inspected with the fwide function.

  * > Calling any function whose orientation conflicts with the orientation of the stream results in undefined behavior.

  */

 #include <wchar.h>

 #include <locale.h>

 using namespace std;

 // run this program: make run

 // depending on frequency and machine performance the total time will be more than given duration

 // despite the real-time priority, because some additional time is spent in outb() functions

 // so "duration" means total sleep time

 // TODO: data types revision

 int main() {

   //cout << "LPT!" << endl; // same as using printf → breaks all folllowing wprintf() calls, see note above

   /*

    * if setlocale() is missing, unicode characters are replaced with ? or „→“ with „->“ because C/POSIX locale is used, 

    * see man setlocale:

    * > On startup of the main program, the portable "C" locale is selected as default.

    * > If locale is an empty string, "", each part of the locale that should be modified is set according to the environment variables.

    */

   setlocale(LC_ALL,"");

   // configuration ----

   int addr = 0xe400; // parallel port address; first number of given port in: cat /proc/ioports | grep parport

   int baseFreq = 10000; // base frequency in Hz, should be between 5 000 between 10 000 Hz; lower frequency leads to dashed/dotted lines instead of greyscale

   int outputPower = 20; // duty cycle; 100 = 100 %

   int duration = 1; // in seconds; total sleep time, see note above

   // ------------------

   int valueWidth =  10; // just for padding of printed values

   int labelWidth = -15; // just for padding of printed labels

   // ' = thousand separator

   // * = padding

   wprintf(L"%*ls %*x\n", labelWidth, L"Parallel port:", valueWidth, addr); // or %#*x – adds 0x prefix

   wprintf(L"%*ls %'*d Hz\n", labelWidth, L"Base frequency:", valueWidth, baseFreq);

   wprintf(L"%*ls %*d %% duty cycle\n",  labelWidth, L"Output power:", valueWidth, outputPower);

   wprintf(L"%*ls %'*d s\n", labelWidth, L"Duration:", valueWidth, duration);

   // in microseconds:

   auto oneSecond = 1000 * 1000;

   auto timeOn =  oneSecond *        outputPower  / 100 / baseFreq;

   auto timeOff = oneSecond * (100 - outputPower) / 100 / baseFreq;

   auto cycleCount = duration * baseFreq;

   wprintf(L"%*ls %'*d ×\n", labelWidth, L"Cycle count:", valueWidth, cycleCount);

   wprintf(L"%*ls %'*d μs 1× in each cycle\n", labelWidth, L"Time on:",  valueWidth, timeOn);

   wprintf(L"%*ls %'*d μs 1× in each cycle\n", labelWidth, L"Time off:", valueWidth, timeOff);

   //wprintf(L"%*ls %*ls\n", labelWidth, L"unicode test:", valueWidth, L"čeština → …");

   wprintf(L"\n");

   // TODO: test whether this address is an parallel port

   if (ioperm(addr,1,1)) { fwprintf(stderr, L"Access denied to port %#x\n", addr), exit(1); }

   // calibration

   auto startTimestamp = chrono::high_resolution_clock::now();

   auto calibrationCycles = 10000;

   auto calibrationSleepTime = 10;

   for (auto i = calibrationCycles; i > 0;  i--) {

     outb(0b00000000, addr);

     usleep(calibrationSleepTime);

     outb(0b00000000, addr);

     usleep(calibrationSleepTime);

   }

   auto finishTimestamp = chrono::high_resolution_clock::now();

   auto measuredDuration = chrono::duration_cast<chrono::nanoseconds>(finishTimestamp - startTimestamp).count();

   auto singleOutbCostNano = (measuredDuration - calibrationCycles*2*calibrationSleepTime*1000)/calibrationCycles/2;

   auto singleOutbCostMicro = singleOutbCostNano/1000;

   wprintf(L"%*ls %'*d μs 2× in each calibration cycle\n", labelWidth, L"Single outb():", valueWidth, singleOutbCostMicro);

   wprintf(L"%*ls %'*d ns 2× in each calibration cycle\n", labelWidth, L"Single outb():", valueWidth, singleOutbCostNano);

   auto minPower = 100*singleOutbCostNano/(1000*1000*1000/baseFreq);

   auto maxPower = 100-minPower;

   wprintf(L"%*ls %*d %% feasible duty cycle\n",  labelWidth, L"Minimum power:", valueWidth, minPower);

   wprintf(L"%*ls %*d %% feasible duty cycle\n",  labelWidth, L"Maximum power:", valueWidth, maxPower);

   if (singleOutbCostMicro < timeOn && singleOutbCostMicro < timeOff) {

     wprintf(L"%*ls %*ls both frequency and duty cycle should be correct\n",  labelWidth, L"Calibration:", valueWidth, L"OK");

     timeOn  -= singleOutbCostMicro;

     timeOff -= singleOutbCostMicro;

   } else if (2*singleOutbCostMicro < (timeOn + timeOff)) {

     wprintf(L"%*ls %*ls frequency should be OK, but duty cycle is not feasible\n",  labelWidth, L"Calibration:", valueWidth, L"WARNING");

     timeOn  -= singleOutbCostMicro;

     timeOff -= singleOutbCostMicro;

     if (timeOn < 0) {

       timeOff -= timeOn;

       timeOn = 0;

     } else {

       timeOn -= timeOff;

       timeOff = 0;

     }

   } else {

     wprintf(L"%*ls %*ls both frequency and duty cycle are not feasible\n",  labelWidth, L"Calibration:", valueWidth, L"ERROR");

     timeOn  = 0;

     timeOff = 0;

   }

   wprintf(L"%*ls %'*d μs 1× in each cycle\n", labelWidth, L"Sleep on:",  valueWidth, timeOn);

   wprintf(L"%*ls %'*d μs 1× in each cycle\n", labelWidth, L"Sleep off:", valueWidth, timeOff);

   wprintf(L"\n");

   // actual signal generation

   startTimestamp = chrono::high_resolution_clock::now();

   for (auto i = cycleCount; i > 0;  i--) {

     outb(0b00000001, addr); // first data out pin = data out 0 = pin 2 on DB-25 connector

     usleep(timeOn);

     outb(0b00000000, addr);

     usleep(timeOff);

   }

   finishTimestamp = chrono::high_resolution_clock::now();

   measuredDuration = chrono::duration_cast<chrono::nanoseconds>(finishTimestamp - startTimestamp).count();

   wprintf(L"%*ls %'*d μs in total\n", labelWidth, L"Deviation:", valueWidth, (measuredDuration-duration*oneSecond*1000)/1000);

   wprintf(L"%*ls %'*d ns in each cycle\n", labelWidth, L"Deviation:", valueWidth, (measuredDuration-duration*oneSecond*1000)/cycleCount);

 }